🚀 go-pugleaf

akoivuma@finsun.csc.fi (Antti Koivumaki) writes:

>I have noticed that when I use 4dos.com, erase *.* works much slower than
>when command.com is used. I tested this by erasing 100 files using each.
>I did this on an otherwise empty hard disk partition. The result:
>- using 4dos.com (v. 4.02), erase/q *.* takes about 5 seconds
>- using command.com (of DOS 3.3), erase *.* takes less than 0.5 seconds.

>The computer is a 12 MHz AT with a 40 MB Seagate ST251 hard disk. 

  I have noticed a similar problem. So here's MY theory.

Everytime 4DOS deletes a file, it goes through the whole routine to get the
path and print it out. Even with the /q option, it may still be going through
the same mess. I set up the alias  "deldir command /c del %1" when I want to
do some "serious" kills.  (CP/M lives!)

-e.b.

==============================================================================
  Eric Berggren             |         "Life is a Turing Test;
  Computer Science/Eng.     |           We're all automatons!"
  ericb@eecs.cs.pdx.edu     |              - (click, whir, buzz, chirp)