Article View: comp.os.msdos.misc
Article #3430Re: DOS 5: Problem with EMM386.EXE and 1542B controller
From: daniel t wesolowski
Date: Wed, 19 Jun 1991 16:34
Date: Wed, 19 Jun 1991 16:34
15 lines
1320 bytes
1320 bytes
In article <1991Jun17.114812.11279@jet.uk> cm@jet.uk (colin manning) writes: >Installing DOS 5 on a machine with a 1542B SCSI controller, >I have a problem with EMM386.EXE. It doesnt work. System >crashes as soon as you try to put something in a UMB, such >as loading RAMDRIVE using devicehigh. Similar problem also >seen with a 1740 EISA SCSI. I have the same problem. If you are using IBM Dos, there is a readme file that says that you cannot load devices high, when using a DMA controlled controller. If you are using MS-Dos I'd assume the same cannot be done. If you are using the EMM386 you have to replace the NOEMS switch to RAM. Make sure aspi4dos.sys is loaded before EMM386. Dan
Technical Details
Message-ID:
<80495@eerie.acsu.Buffalo.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!spool.mu.edu!caen!zaphod.mps.ohio-state.edu!ub!acsu.buffalo.eduReferences:
<1991Jun17.114812.11279@jet.uk>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!spool.mu.edu!caen!zaphod.mps.ohio-state.edu!ub!acsu.buffalo.edu From: dtw@acsu.buffalo.edu (daniel t wesolowski) Newsgroups: comp.os.msdos.misc,comp.periphs.scsi Subject: Re: DOS 5: Problem with EMM386.EXE and 1542B controller Message-ID: <80495@eerie.acsu.Buffalo.EDU> Date: 19 Jun 91 16:34:52 GMT References: <1991Jun17.114812.11279@jet.uk> Sender: news@acsu.Buffalo.EDU Followup-To: comp.os.msdos.misc Organization: SUNY Buffalo Lines: 15 Nntp-Posting-Host: lictor.acsu.buffalo.edu