🚀 go-pugleaf

Could someone please help me configure Dos!
I'm running a P-75 under Win'95, I want to run a demo that requires
580 of conventional memory plus some expanded memory (1024?), I can't
seem to get it to run at all under Win'95, and am not sure it would anyway,
what I would like to do is to get it to run under dos.  I have a icon
reconfigured to boot with a config.sys and autoexec.bat.  The current
configuration gives me about 565 of ram and no expanded, when I change 
the 
emm386 from noems to ram for the expanded, it eats a chunk of my 
conventional memory (down to 520 or something).  I'm not sure if all of 
my 
drivers are loading in high memory, when I do mem /c, it looks like the
mscdex and the mouse aren't in high memory, could someone take a look
at these files and give me some hints.  I tried memmaker and this is
the best it will do...please help me, thanks alot in advance!
(send comments to neudy@sky.net)

Heres my config.sys
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
BUFFERS=22,0
FILES=30
DOS=UMB
LASTDRIVE=Z
FCBS=4,0
DEVICEHIGH /L:1,16976 =C:\WINDOWS\SETVER.EXE
DOS=HIGH
DEVICEHIGH /L:1,11808 =C:\CDROM\TORISAN.SYS /D:TSYCD3 /P:SM
DEVICEHIGH /L:1,15840 =C:\WINDOWS\COMMAND\DRVSPACE.SYS /MOVE

Heres autoexec.bat
LH /L:1,51248 C:\windows\command\MSCDEX.EXE /D:TSYCD3
@ECHO OFF
PROMPT $p$g
SET MSINPUT=C:\MSINPUT
LH /L:0;1,25056 /S C:\MSINPUT\mouse\MOUSE.exe /Q
PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\DOS
SET TEMP=C:\DOS
SET BLASTER=A220 Ixx Dx T1
SET SNDSCAPE=C:\SNDSCAPE
C:\SNDSCAPE\SSINIT.EXE /I