🚀 go-pugleaf

jko@phoenix.oulu.fi (Jaakko Kokko) writes:

]I am having compatibility problems with DR-DOS 6.0 and Windows 3.1,
]and I hope another DR-DOS user out there could help me.

]I have DR-DOS 6.0 (the upgraded version) installed in my 486-33 with
]a SuperStor compressed hard disk partition. When I tried to install
]Windows 3.1 on the uncompressed partition, the install program threw
]me out at the end of the second diskette, with the following message:

]  Standard Mode:  Fault in MS-DOS Extender.
]EC=0000 CS=005B IP=0975 AX=0000 BX=0008 CX=0404 DX=005A
]SI=3D59 DI=0930 BP=0882 DS=02E7 ES=02DF SS=027F SP=01F2

Can you send me a MEM /A?  I'm interested in who is loaded at 005B:xxxx.
Typical things that I recommend that people often forget is:

1) bare OS (no config or autoexec, or at least minimals) which you
already have. 

2) no BIOS rom shadowing.

Usually between these two, I can get most things installed.

--
John "Frotz" Fa'atuai	frotz@novell.com		(email@domain)
Desktop Systems		uunet!novell.com!frotz		(bang address)
  Group/Novell		NOVELL:FROTZ  or  FROTZ@NOVELL	(MHS address)
c/o TS Dept.		
80 Garden Court		408/649-8209			(fax)
Monterey, CA  93940

Semi-official support can be obtained at "drdos@novell.com"