🚀 go-pugleaf

In article <pst.653596434@ack.stanford.edu> pst@ack.stanford.edu (Paul Traina) writes:
>Originally, I was doing it by speeding up the system timer and counting
>ticks, then calling the original INT 1A routine from my handler every
>n ticks.  Well, this made correction for delay really ugly,  so I've
>now just reprogrammed the system timer to generate interrupts exactly
>20 times a second instead of 18.207 times a second.

Here's an idea -- not particularily new, but a good one.  Rather than
give up on your real-time clock, just bump it over every now and then.
In other words, use the following rule:  If (i is not a multiple of ten)
or (i is equal to 100), then (give the BIOS a timer tick).

This will keep your system clock in sync while maintaining your 20 Hz
signal.  I like passing on a correct clock tick, especially since it
doesn't really take that much extra work or time to do so.

-- 
Stephen Trier                              Case Western Reserve University
Work: trier@cwlim.ins.cwru.edu             Information Network Services
Home: sct@seldon.clv.oh.us