RE: Turbo C Interrupt Question

Article View: comp.os.msdos.programmer

Article #2654

Back to comp.os.msdos.programmer Previous Next

#2654

From: KRW1
Date: Fri, 12 Oct 1990 00:22

4 lines
668 bytes

You can check the in-service register of the interrupt controller
to see if irq 0 is active.  Output 0bh to port 20h and read it back.
Bit zero will be 1 if the irq 0 is active (other, lower priority bits
may be set as well, so be sure to mask it).  -- Kevin

Technical Details

Message-ID: <11109019:22:47KRW1@lehigh.bitnet>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!ub!dsinc!netnews.upenn.edu!vax1.cc.lehigh.edu!lehigh.bitnet!KRW1

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!ub!dsinc!netnews.upenn.edu!vax1.cc.lehigh.edu!lehigh.bitnet!KRW1
From: KRW1@Lehigh
Newsgroups: comp.os.msdos.programmer
Subject: RE: Turbo C Interrupt Question
Message-ID: <11109019:22:47KRW1@lehigh.bitnet>
Date: 12 Oct 90 00:22:47 GMT
Lines: 4
To: lusysnz@VAX1.CC.LEHIGH.EDU
X-Envelope-to: lusysnz