🚀 go-pugleaf

In article <1990Oct11.161231.261@Octopus.COM>, stever@Octopus.COM (Steve Resnick ) wrote:
}I got all that, so far. The interrupt vector table (in real mode) is located
}at 0000:0000. IRQ12's vector should be located at 0000:0030. This is all well
}and fine, but there are processor exceptions which map to hardware interrupts.
}I cannot find where INT 12 is mapped to an exception. My default BIOS int 12
}handler does not deal with processor exceptions, and my own int 12 handler for
}dealing with serial interrupts does not either. Normally, exception 12 (stack
}fault exception) will not occur in real mode, unless you have a SP of 1 and
}push a word on the stack. Then SP = -1 = FFFFH which is not real good. 
}What I want to know, is how that gets handled independantly of my serial
}interrupts. 

If you are running a 386 memory manager such as QEMM-386 or 386^MAX, the
memory manager gets any CPU exceptions first, and decides whether or not
to pass them down to the virtual86-mode program via the real-mode interrupt
vector table.  BTW, an exception 12 will also occur on a 386 when attempting
to access the word at FFFFh in the stack segment (any other segment gets you
an exception 13).

--
UUCP: {ucbvax,harvard}!cs.cmu.edu!ralf -=- 412-268-3053 (school) -=- FAX: ask
ARPA: ralf@cs.cmu.edu  BIT: ralf%cs.cmu.edu@CMUCCVMA  FIDO: 1:129/3.1
Disclaimer?    |   I was gratified to be able to answer promptly, and I did.
What's that?   |   I said I didn't know.  --Mark Twain