Designing internal cards 4 the PC bus

Article View: comp.os.msdos.programmer

Article #421

Back to comp.os.msdos.programmer Previous Next

#421

From: MacGyver
Date: Wed, 22 Jul 1992 06:15

15 lines
1130 bytes

	(Note: I am not sure if this is the right forum for this question,
so if it isn't, please direct me to the RIGHT one!)

	I am currently designing severl projects for the PC that use
I/O ports and memory mapped devices (maybe only Ports). What I NEED is
a buffered I/O card, with access to a 16 byte set of ports, with fully
decoded R/W lines. I will build it myself if I have to, but I wonder if I can
avoid re-inventing the wheel as it were. Any suggestions?
(I DO NOT want to use anything besides a bus card, cuz I need the experience.)
	I am familiar with only one book on the subject, "Interfacing to the
IBM PC" by Sams Books.I need something along those lines, if not a fully
functional device.
	-Marty
		falatic@mentor.cc.purdue.edu  (Use E-Mail if possible)

Technical Details

Message-ID: <54731@mentor.cc.purdue.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!darwin.sura.net!gatech!purdue!mentor.cc.purdue.edu!falatic

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!darwin.sura.net!gatech!purdue!mentor.cc.purdue.edu!falatic
From: falatic@mentor.cc.purdue.edu (MacGyver)
Newsgroups: comp.os.msdos.programmer
Subject: Designing internal cards 4 the PC bus
Message-ID: <54731@mentor.cc.purdue.edu>
Date: 22 Jul 92 06:15:51 GMT
Organization: Purdue University Computing Center
Lines: 15