Article View: comp.os.msdos.programmer
Article #4473Re: RAM Disk Problem with TC++
From: Brian K. W. Hook
Date: Thu, 31 Jan 1991 23:10
Date: Thu, 31 Jan 1991 23:10
20 lines
1489 bytes
1489 bytes
In article <4662@altos86.Altos.COM> jerry@altos86.Altos.COM (Jerry Gardner) writes:
>
>halfway through the compilation. There is plenty of room on the RAM
>disk for the object files, and the compiler is swapping to the hard
>disk. It always hangs at exactly the same place in the source and the
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I was having a major problem with this using TC 1.00. It seemed that
the .PRJ file was becoming corrupted over time and that this would in
effect cause it to lock up in the same location over and over. You
did not state whether you could compile without the ram disk, whether
you had the -Qx (Options--extended memory on) option in use, or whether
you were using TC or TCC. Are you using MAKE? A .BAT file? This
information would be helpful.
Anyway, if you are using a .PRJ file and it locks all the time, delete
your .PRJ file and rebuild it. Then do a complete rebuild of all your
source. That should work, IF it is your problem.
Brian
Technical Details
Message-ID:
<26608@uflorida.cis.ufl.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!helios!bcm!dimacs.rutgers.edu!seismo!uunet!samsung!caen!uflorida!reef.cis.ufl.edu!jdbReferences:
<4662@altos86.Altos.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!helios!bcm!dimacs.rutgers.edu!seismo!uunet!samsung!caen!uflorida!reef.cis.ufl.edu!jdb From: jdb@reef.cis.ufl.edu (Brian K. W. Hook) Newsgroups: comp.os.msdos.programmer Subject: Re: RAM Disk Problem with TC++ Message-ID: <26608@uflorida.cis.ufl.EDU> Date: 31 Jan 91 23:10:03 GMT References: <4662@altos86.Altos.COM> Sender: news@uflorida.cis.ufl.EDU Organization: UF CIS Dept. Lines: 20