Re: Generating a serial port interrupt

Article View: comp.os.msdos.programmer

Article #4941

Back to comp.os.msdos.programmer Previous Next

#4941

From: jvb7u
Date: Thu, 28 Feb 1991 18:24

23 lines
1390 bytes

I suspect that it would be much easier to use the parallel port for what
you want to do.  I believe that you can directly drive the interface to
generate an interrupt.  Take a look at the book:

  The IBM personal computer from the inside out / Murray Sargent III and
  Richard L. Shoemaker. -- Rev. ed. -- Reading, Mass. :
  Addison-Wesley Pub. Co., c1986.

for more information.  Also, a nice piece of code to hack up for general
hardware interrupt control (or use it as-is for serial interrupt control)
under MicroSoft C is:

PD1:<MSDOS.C>ASYNCPEC.ARC	Interrupt-driven async comm rtns for MSC 5.x

available from wmsr-simtel.army.mil
(or mirrors/msdos/c/asyncpec.arc on wuarchive.wustl.edu).

Jon
--
Jon Brinkmann					Astronomy Department
Internet:	jvb7u@Virginia.EDU		University of Virginia
UUCP:		...!uunet!virginia!jvb7u	P.O. Box 3818
SPAN/HEPnet:	6654::jvb7u			Charlottesville, VA 22903-0818

Technical Details

Message-ID: <1991Feb28.182455.18954@murdoch.acc.Virginia.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!uunet!shelby!mcnc!uvaarpa!murdoch!usenet

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!uunet!shelby!mcnc!uvaarpa!murdoch!usenet
From: jvb7u@Virginia.EDU
Newsgroups: comp.os.msdos.programmer
Subject: Re: Generating a serial port interrupt
Keywords: msdos serial port interrupt
Message-ID: <1991Feb28.182455.18954@murdoch.acc.Virginia.EDU>
Date: 28 Feb 91 18:24:55 GMT
Sender: jvb7u@Virginia.EDU
Organization: Department of Astronomy, University of Virginia
Lines: 23