Re: Anyone have experience using a Uart in loopback mode.

Article View: comp.os.msdos.programmer

Article #5940

Back to comp.os.msdos.programmer Previous Next

#5940

From: DJ Delorie
Date: Wed, 24 Apr 1991 14:29

18 lines
1263 bytes

In article <14466@ccncsu.ColoState.EDU>, barbourj@mozart.cs.colostate.edu (jim barbour) writes:
> 
> I have need to simulate a loopback plug connected to my serial port.  Its
> for writing and testing some transport protocols.
> 
> I've figured out how to put my serial port in LoopBack mode, but it will not
> respond once I've done so.
> 

Watch out for this bug - when in loopback mode, you will NOT get the
(transmit or receive, I don't remember) interrupt anymore.  You will
get the other one.  It's far easier and better to get a connector and
connect pins 2 & 3 together, and have a real loopback connector.  If
this isn't feasible, you'll have to adjust the software to compensate
for this bug.

DJ
dj@ctron.com

Technical Details

Message-ID: <1441@balrog.ctron.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!ncar!csn!ccncsu!purdue!bu.edu!snorkelwacker.mit.edu!usc!samsung!balrog!ctron.com

References: <14466@ccncsu.ColoState.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!ncar!csn!ccncsu!purdue!bu.edu!snorkelwacker.mit.edu!usc!samsung!balrog!ctron.com
From: dj@ctron.com (DJ Delorie)
Newsgroups: comp.os.msdos.programmer
Subject: Re: Anyone have experience using a Uart in loopback mode.
Message-ID: <1441@balrog.ctron.com>
Date: 24 Apr 91 14:29:21 GMT
References: <14466@ccncsu.ColoState.EDU>
Sender: news@balrog.ctron.com
Reply-To: dj@ctron.com
Distribution: usa
Organization: None whatsoever
Lines: 18

Reply to Parent Message