SCSI question

Article View: comp.os.msdos.programmer

Article #6716

Back to comp.os.msdos.programmer Previous Next

#6716

From: Peter Hkansson
Date: Mon, 20 May 1991 19:20

16 lines
1256 bytes

Hello hardware hackers out there.
I'm designing a scsi interface to an ms-dos machine. There is 
nothing wrong with the commersial ones, but i have a tread i
would like to examine, has to to with device sharing.
the design is (probebly)based upon a wd33c93 chip.
The point is to have full control of all devices on the bus and
be free to mix between tape and disk operations.
My problem is lack of experience with scsi-programming.
Does anyone out there have some software that deals with scsi and
is willing to share with me ? macro or C or whatever you have used is ok,
even something that works with (is bios) some commersial scsi board.
Any hints or ideas is welcome, safest is by e-mail, since my
access to news is not 100%.

Best mail adress is peter@volvo.se
Thanks in advance.

Technical Details

Message-ID: <912@volvo.vd.volvo.se>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!uupsi!sunic!chalmers.se!volvo!peter

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!uupsi!sunic!chalmers.se!volvo!peter
From: peter@vd.volvo.se (Peter Hkansson)
Newsgroups: comp.os.msdos.programmer
Subject: SCSI question
Summary: Hardware advice
Keywords: SCSI hardware-disc-interface
Message-ID: <912@volvo.vd.volvo.se>
Date: 20 May 91 19:20:14 GMT
Reply-To: peter@volvo.UUCP (Peter Hkansson)
Organization: VTS Transportation Systems, A company in The VOLVO Group
Lines: 16