🚀 go-pugleaf

I'm not a DOS programmer and I`m trying to write a program to read and 
write over the serial port. The basic structure is:

while (1) {

	<if there is something to send out then stuff it down the serial port >

	<if something has been sent to the serial port then read it>
}


I've tried opening "com2" using fopen and I can successsfully stuff
data down the stream. But when I try to read from the stream with say
a call to fgetc, I get a "General failure reading com2:" errormessage.
I've fopened com2 for reading and writing and the baud rates etc are
correct and I can read data from the hardware port using bioscom so
communication is working.  What is wrong here? Will this approach work
or am I on the wrong track?

My second question is, if I do get the read working how can I avoid 
blocking on it?

If some kind soul out there has a stitch of code (C would be great)
that does what I want I would be most thankful for their help.

Thanks.

Gord Kurtenbach

PS: I've notice that the DOS command "copy com2: junk" also gives the
same error. Could my system be configured wrong?