🚀 go-pugleaf

In article <4fere1$dbt@umbra.unr.edu>, ivo@cs.unr.edu (Ian (Ivo) Veach) wrote:
>We've got a new Dell P5-100 that has got a 3COM 5X9 "NIC" on it.  I've got
>ODI/VLM running (novell login no problem) just spiffy, but cannot get the
>ODI PKT driver to work (to run Winsock, NCSA DOS Telnet, etc).  Anyone
>have any suggestions or running a similar setup on their LAN?  The
>following info loads fine, as does winsock, but NCSA telnet reports
>"network jammed; probable break in cable" and all win suite apps (ewan,
>netscape) are dead in the water.  I've already updated to the latest 3COM
>and netware drivers, to my knowledge... 
>
>The AUTOEXEC has the following net stuff:
>        lsl.com
>        3C5X9.com
>        ipxodi.com
>        odipkt24 1 96
>        vlm.exe
>        winpkt 0x60
odipkt 1 101 
winpkt 0x65
vlm 
-- We are happily running everything with this setting! 
Good luck.
Jason 
>And here's a copy of NET.CFG:
>
>LINK DRIVER 3C5X9
>        FRAME ETHERNET_802.3
>        PROTOCOL IPX 0 ETHERNET_802.3 
>        FRAME ETHERNET_II
>        PROTOCOL IPX 8137 ETHERNET_II
>
>NetWare DOS Requester
>        FIRST NETWORK DRIVE = F
>;        USE DEFAULTS = OFF
>        PREFERRED SERVER = FISHNET
>
>Anyone know if there's a conflict or incompatability?  Am I doing 
>something ignorantly wrong here?  I've tried many tests to no avail, so 
>any help would be fantastic...Thanks.
>
>
>Ivo              :: "If Cyrano De Bergerac Fell prey to the blades of fifty
>ivo@cs.unr.edu   ::  men, With a heart and a sword he'd drive them back
>                 ::  Perchance to see Roxanne's eyes light up the sky again"
>CGpCRWPADT&SWM   ::             - Blues Traveler (Sweet Pain)