🚀 go-pugleaf

Jeffrey Levenglick wrote:
> 
> All:
> Ok.. here is the problem:
> I had a 3.12 all patched current and working great.
> Config:
> HP Netserver LF
> 32 Meg RAM
> SCSI CD,Hard drives (3- 520meg) Floppy and DAT Tape
> (all HP parts)
> the drives are set to RAID Level 1 and is controlled by the HP Server
> and not Novell.
> Mono Monitor (just in case ya wanted to know :) )
> 
> I upgraded to 4.1 off of the CD  (same server) and it worked great.
> I checked the dsk and nlm's for the CD and i'm running the CDROM and
> CDNASPI that comes with 4.1
> (I also tried using the patch from CDUP3.EXE (I think that was the
> latest CD patch)
> 
> The problem:
> I mount a CD all is ok.
> I go to access it from the server and the server says that the file on
> the CD is corrupted.
> I access it from a node and get same results. I can do a dir of it tho.
> 
> I tried using the /r to re-build the index. I have noticed that my
> blocks are 32k on the hard disk's and 64k on the CD. All compression on
> the CD and sub are off. Sub and compression are on for the hard disks.
> Anybody else have or know what the problem is?
> Jeffrey

I suggest you trie ASPICD instead of CDNASPI. CDNASPI insn't supported 
anymore with Netware 4.10.

Marcel Cox