🚀 go-pugleaf

I've got a friend who is working on a problem involving 10 Netware
3.12 servers running Netware for Macintosh.  The servers are located
around the country, but are setup with one Appletalk Zone.  The problem
is that when the Mac is started up and attempts to login, only a partial
list of the servers appears.  When the list is refreshed, a different
partial list shows up. They also seem to be having problems with the
Appletalk Print Server, with printers not loading correctly, and the
list of available printers changing each time.

Here is the AUTOEXEC.NCF: (With names and IP addresses changed...)

FILE SERVER NAME FS1

IPX INTERNAL NET A00001

SET TIMEZONE EST5EDT
SET ALLOW UNENCRYPTED PASSWORDS=ON

LOAD SNMP

LOAD 3C509 SLOT=6 FRAME=ETHERNET_802.3 NAME=IPXNET1
BIND IPX TO IPXNET1 NET=FFFF

LOAD TCPIP TRAP=xxx.xxx.64.31
LOAD RDATE /P 30 XXX.XXX.64.41 XXX.XXX.64.42

LOAD 3C509 SLOT=6 FRAME=ETHERNET_II NAME=IPNET1
BIND IP TO IPNET1 ADDR=XXX.XXX.64.111 MASK=255.255.255.0 GATE=XXX.XXX.64.27

;PATHWORKS SUPPORT
BIND IPX TO IPNET=913

DISABLE LOGIN

MOUNT PROG
MOUNT VOL1
MOUNT VOL2
MOUNT MAC

LOAD REMOTE FINAL4
LOAD RSPX

LOAD MONITOR /P

LOAD APPLETLK NET=50001 ZONE=("Zone-One")
LOAD 3C509 SLOT=6 FRAME=ETHERNET_SNAP NAME=MACNET1
BIND APPLETLK MACNET1 NET=0-0
LOAD AFP

LOAD ATCON

LOAD ASTART
ENABLE LOGIN
LOAD LTAPLUS
LOAD SWINTRAK
LOAD NET-PROT

LOAD PSERVER FS1A
LOAD ATPS
UNLOAD CONLOG


TIA for any help you might be able to give...
-- 
Mark Taylor
OSU College of Medicine Division of Computing Services
mtaylor+@osu.edu     mtaylor@magnus.acs.ohio-state.edu
PHONE: (614) 292-6192              FAX: (614) 292-0745