🚀 go-pugleaf

RAY F wrote:
> 
> I'm setting up a Workstation at work which has win95, and NW 3.12 Server,
> Win95 is installed correctly and the Server is working fine, the problem is
> when the Workstation logins in the Laser Printer is map in the login script
> to LPT1,
> I have a  local printer on that Port, and when i try to print to my local
> printer it always prints to the laser printer, I tried to use the UNC
> //servername/laser command in the printer setup on W95 but it always prints
> to the Laser Printer on the Network,
> 
> How to end a capture of Lpt1 to the network printer
> my login script captures the network printer
> I want to map my local printer to LPT1
> Also map to my Network Printer as LPT2
> I'm using 32 bit Network drivers included by W95
> Not using dos mode network drivers
> 
> We are using Tenmast (DOS) software, (Tenant Management Software)
> Do not want to make any changes on server that could effect other work
> stations
> 
> ANY HELP is appreciated
> 
> Thanks in Advance.
> RAY

This happens all the time. the temporary fix is easy and simple. 
Find a drive in "my computer" mapped to sys:
open it up.
open the "public" folder
double click on syscon.exe
select user options
arrow down to your login name and press enter
arrow down to login script and press enter
on the very last line type 
	#endcap
hit esc
it will ask you if you want to save. arrow to yes and press enter
press esc untill your asked if you want to exit syscon
arrow to yes and press enter.
reboot
Tell your network administrator to fix the problem correctly and how you
got around it.


Guarenteed to work,
Bill Harding, CNA