🚀 go-pugleaf

While your configuration seems correct, I would suggest that you
should use a 32bit driver for your lan card. Client32 drivers for
intel cards are available as a file called INTLAN.EXE somewhere on the
Netware support server (http://support.novell.com). Your STARTNET.BAT
will than become:

ECHO OFF
SET NWLANGUAGE=ENGLISH
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\EPRO.LAN PORT=210 FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\EPRO.LAN PORT=210 FRAME=ETHERNET_II
LOAD C:\NOVELL\CLIENT32\TCPIP.NLM
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM

For your NET.CFG file, I would suggest that you should simply your
TCPIP section and change your IPX section to bind IPX to
Ethernet_802.2 only. This will become (only part of NET.CFG shown):

Protocol TCPIP 
	PATH TCP_CFG C:\NOVELL\CLIENT32\TCP
	IP_ADDRESS 203.120.117.67
	IP_NETMASK 255.255.255.192
	IP_ROUTER 203.120.117.65

NetWare DOS Requester 
...

Protocol IPX
	IPX SOCKETS 40
	NET BIND ETHERNET_802.2


I hope that this will help you.

Marcel Cox



kelvin@pefu.com.sg (Kelvin Wong) wrote:

>I have update one of my workstation running WFW311 to client32
>dos/win. Because that workstation connects to internet thru TCP/IP, I
>selected the TCP/IP option during installation. When running
>startnet.bat this error occurs:

>Error Binding TCPIP protocol to EPROODI
>Board number out of range or media frame type not supported

>My workstation is using Intel EtherExpress Pro/10. Can anyone advise??

>Regards
>Kelvin Wong

>Below is my startnet.bat and net.cfg list:

>Startnet.bat
>==========

>ECHO OFF
>SET NWLANGUAGE=ENGLISH
>C:\NOVELL\CLIENT32\NIOS.EXE
>C:\NOVELL\CLIENT32\LSL.COM
>C:\NOVELL\CLIENT32\N16ODI.COM
>C:\NOVELL\CLIENT32\NESL.COM
>C:\NOVELL\CLIENT32\EPROODI.COM
>LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
>LOAD C:\NOVELL\CLIENT32\PC32MLID.LAN
>LOAD C:\NOVELL\CLIENT32\TCPIP.NLM
>LOAD C:\NOVELL\CLIENT32\IPX.NLM
>LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM

>:NPRINTER
>NPRINTER PS1 0
>IF ERRORLEVEL 1 ECHO.
>IF ERRORLEVEL 1 ECHO Continue only after 15 seconds ...
>IF ERRORLEVEL 1 PAUSE
>IF ERRORLEVEL 1 GOTO :NPRINTER

>:LOGIN
>F:LOGIN
>IF ERRORLEVEL 1 ECHO.
>IF ERRORLEVEL 1 ECHO Invalid user-id or password ...
>IF ERRORLEVEL 1 PAUSE
>IF ERRORLEVEL 1 GOTO :LOGIN

>C:\WINDOWS\ODIHLP.EXE


>net.cfg
>======

>Link Support 
>	Buffers   8 1500
>	MemPool   4096
>	Max Boards   4
>	Max Stacks   4

>Link Driver EPROODI
>	PORT 210
>	FRAME ETHERNET_802.2
>	FRAME ETHERNET_II
>	
>Link Driver NCOMX
>	IRQ   4 
>	PORT   3f8  

>Protocol TCPIP 
>	PATH TCP_CFG C:\NOVELL\CLIENT32\TCP
>	IP_ADDRESS 203.120.117.67 LAN_NET
>	IP_NETMASK 255.255.255.192 LAN_NET
>	IP_ROUTER 203.120.117.65 LAN_NET
>	BIND EPROODI EPROODI #1 ETHERNET_II LAN_NET
>	ip_address   0.0.0.0 PPP_NET
>	Bind   NCOMX #1 PPP PPP_NET

>NetWare DOS Requester 
>	Name Context = "LEVEL_4.PFMFG_S"
>	Preferred Tree = PFTREE
>	First Network Drive = F
>	NETWARE PROTOCOL = NDS BIND
>	Force First Network Drive = ON

>Protocol IPX
>	IPX SOCKETS 40