🚀 go-pugleaf

Christian Fiala wrote:

> Hi,
>
> the 4Gig HDD get's to small and i'll habe to change it.
> there are 2 4gig fujitsu 7200rpm (older models) mirrored.
>
> on this server there are approximately 15 user working, splitted to two
> 10mbit lans. traffic isn't that much and 10mbit are enough at that time.
>
> there are also 2 scsi-cdroms in it and one hp-dds3 streamer, both
> (including the hdd) on a symbios 815 controller.
>
> i'm thinking on changing the 2* 4gig hdds to 2*13gig ide (ibm djna), also
>
> mirrored.
>
> does someone of you have experience with ide in servers?
> it think the speed isn't that problem? (is it???)
>
> tnx for your answers,
> christian fiala

IDE is a poor choice for mirroring. If you have to use IDE, make sure that
the drives are on separate channels. If not, you are wasting a 4gig drive.
The reason being is that if the master goes down, so does the slave.

You are much better off using SCSI as you can mirror the drives easier and if
one fails on the chain, the other one can pick up the slack.

Charles