🚀 go-pugleaf

Phil Schuman wrote:
> 
> dumb question on the Server def for the NIC card and the BIND -
> 
> We currently have a single server on our 4.1 IPX LAN -
> We are adding a 2nd server - that is on a 4.1 IPX LAN by itself..
>         we are NOT combining NDS trees -
>         just getting everying on the same Ethernet set of hubs..
> 
> in the Bind - do I make each server the 'same' network, or different ??
> 
>         ie - Bind IPX 3c59x  NET=708
> 
> do I make each server that is connected to the same physical Ethernet,
> have the same NET name, or different names ?
> 
> Phil -




I'm not sure what you mean by "NET name". Networks don't have names in
the IPX world, they have numbers. (in your example above the IPX network
number is 708) You must have ALL devices on a given network segment
(including servers) set up to use the same network number for that
segment. Otherwise you get routing errors.
-- 
******************** WARNING ********************
If you wish to replay to me via e-mail,
DO NOT reply to the address listed in the header!

The address: usteam@tech-center.com is an 
autoresponder for some dumb corporation that kept
sending me spams. I list it as the address in my 
header so that any companies that send spam by 
reading my address out of the header will get 
spammed back! 

To reply to me via e-mail, use:
tweintz@mail.idt.net
or netscape mail users, double click on this:
MailTo:Tweintz@mail.idt.net
*************************************************