Thread View: comp.os.netware.misc
4 messages
4 total messages
Started by Hartanto Setiawan
Sun, 28 Jul 1996 00:00
***NEED HELP ON v4.1 INSTALLATION***
Author: Hartanto Setiawan
Date: Sun, 28 Jul 1996 00:00
Date: Sun, 28 Jul 1996 00:00
15 lines
1148 bytes
1148 bytes
I've been given a message "The PROCESSOR is already in PROTECTED mode. You need to remove or RECONFIGURE your DOS MEMORY MANAGER before installing Netware" everytime I try to install. I partitioned my HD to 30 MB of Pri DOS (f/ the BOOT Files) and 1.9 MB for Sec DOS which basically there aren't any files on BOTH of them. I'm using a CD-ROM from the server where I booted my Comp. from my comp. manufacture's diskette which has the driver for the CD-ROM. I'd appreciate any help that I can get. Thanks. mailto:bh805@scn.org
Re: ***NEED HELP ON v4.1 INSTALLATION***
Author: Rob Snelgrove
Date: Mon, 29 Jul 1996 00:00
Date: Mon, 29 Jul 1996 00:00
20 lines
1269 bytes
1269 bytes
Hartanto Setiawan <bh805@scn.org> wrote: >I've been given a message "The PROCESSOR is already in PROTECTED >mode. You need to remove or RECONFIGURE your DOS MEMORY MANAGER >before installing Netware" everytime I try to install. >I partitioned my HD to 30 MB of Pri DOS (f/ the BOOT Files) and 1.9 >MB for Sec DOS which basically there aren't any files on BOTH of >them. >I'm using a CD-ROM from the server where I booted my Comp. from my >comp. manufacture's diskette which has the driver for the CD-ROM. >I'd appreciate any help that I can get. Thanks. >mailto:bh805@scn.org How are you booting your system? You are not supposed to use a memory manager. Clear that out of config.sys.
Re: ***NEED HELP ON v4.1 INSTALLATION***
Author: ph.ph1.ekl
Date: Mon, 29 Jul 1996 00:00
Date: Mon, 29 Jul 1996 00:00
11 lines
1085 bytes
1085 bytes
In <31FB4465.7EC3@scn.org>, Hartanto Setiawan <bh805@scn.org> writes: >I've been given a message "The PROCESSOR is already in PROTECTED >mode. You need to remove or RECONFIGURE your DOS MEMORY MANAGER >before installing Netware" everytime I try to install. >I'm using a CD-ROM from the server where I booted my Comp. from my >comp. manufacture's diskette which has the driver for the CD-ROM. On the diskette (or a copy of it), remove the EMM386.exe and perhaps HIMEM.SYS from the CONFIG.SYS file.
Re: ***NEED HELP ON v4.1 INSTALLATION***
Author: Mark K Hall
Date: Mon, 29 Jul 1996 00:00
Date: Mon, 29 Jul 1996 00:00
25 lines
1559 bytes
1559 bytes
Hartanto Setiawan (bh805@scn.org) wrote: : I've been given a message "The PROCESSOR is already in PROTECTED : mode. You need to remove or RECONFIGURE your DOS MEMORY MANAGER : before installing Netware" everytime I try to install. : I partitioned my HD to 30 MB of Pri DOS (f/ the BOOT Files) and 1.9 : MB for Sec DOS which basically there aren't any files on BOTH of : them. : I'm using a CD-ROM from the server where I booted my Comp. from my : comp. manufacture's diskette which has the driver for the CD-ROM. I bet your using an autoexec and config when your installing netware. If you have to load DOS drivers to get at the cd, that should be the only thing you have in the config and autoexec. Remove all other statements especially himem.sys and emm386. That is probably your problem because you can't load netware when you have any memory managers present. : I'd appreciate any help that I can get. Thanks. : mailto:bh805@scn.org
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads