🚀 go-pugleaf

In article <4aoguc$14sg@inet.up.ac.za>, PostMaster@Janus.TechPTA.AC.ZA 
says...
>
>Please reply to this posting via e-Mail.
>
>The following trap happens after the logo is displayed on disk 1 while 
>installing OS/2 Warp Connect:
>
>TRAP 000d  ERRCD=0000  ERACC=****  ERLIM=********
>EAX=05101f6a  EBX=00001f6a  ECX=fc800000  EDX=20491f7a
>EBI=000003f6  EDI=fc80001b  EBP=00004e44  FLG=00213202
>CS:EIP=0470:00001715  CSACC=009b  CSLIM=000051f7
>SS:ESP=0030:00004e32  SSACC=109f  SSLIM=00003fff
>DS=0460  DSACC=0093  DSLIM=0000037e  CR0=8001001b
>ES=0030  ESACC=1097  ESLIM=00003fff  CR2=ffe56000
>FS=0108  FSACC=0093  FSLIM=0000262f  
>GS=0000  GSACC=****  GSLIM=********
>
>The system detected an internal processing error at
>location ##0160:fff5c364 - 000d:a364.
>60000, 9084
>
>05860525
>Internal Revision 8.210, 94/11/09
>
>The system is stopped. Record all of the above information and
>contact your service representative.
>
>
>My system consists of the following:
>
>  TMC PCI541T (Microcom?) PCI Motherboard
>  Intel Pentium 100
>  Intel Triton PCI Chipset
>  AWARD BIOS (1995)
>  32 Mb RAM
>  Conner CFS1275A 1 Gb Harddrive (Connected to first onboard IDE port)
>  S3 Vision 864 PCI Display Card (2Mb RAM)
>  Creative 4X Speed CDROM (Connected to second onboard IDE port)
>  Creative SoundBlaster 16 (with ASP upgrade)
>    Addr       = 220
>    Int        = 5
>    DMA (Low)  = 1
>    DMA (high) = 5
>
>I even tried disabling the external cache but to no avail, yhe above 
trap 
>still happened.
>
>Any help will be greatly appreciated.
>
>Please reply to this posting via e-Mail to: 
>  PostMaster@Janus.TechPTA.AC.ZA
>

Sorry for replying to my own post, but the following needs to be added to 
the original posting.

Sometimes the following trap occurs:

The system cannot find the file 'ibm1s506.add' this device
driver, program, or data file is not located in the default path or
the path specified for it in the CONFIG.SYS file. Install this file
in the correct directory or correct the appropriate CONFIG.SYS file
statement.
The system cannot find the file 'ibm2flpy.add' this device
driver, program, or data file is not located in the default path or
the path specified for it in the CONFIG.SYS file. Install this file
in the correct directory or correct the appropriate CONFIG.SYS file
statement.

> Both of the above files ARE on install disk 1 when the trap occurs.

TRAP 000d  ERRCD=0000  ERACC=****  ERLIM=********
EAX=0000001b  EBX=fff206e0  ECX=fff20001  EDX=00000001
EBI=00005c0b  EDI=fdee5c0b  EBP=00001fc6  FLG=00213202
CS:EIP=0540:00000035  CSACC=009f  CSLIM=000023b1
SS:ESP=00eb:00001f9e  SSACC=0093  SSLIM=00001fff
DS=0001  DSACC=****  DSLIM=********  CR0=8001001b
ES=0400  ESACC=00f3  ESLIM=000071f0  CR2=ffe56000
FS=0538  FSACC=00f3  FSLIM=00000a6b  
GS=0000  GSACC=****  GSLIM=********

The system detected an internal processing error at
location ##0160:fff5c364 - 000d:a364.
60000, 9084

05860525
Internal Revision 8.210, 94/11/09

The system is stopped. Record all of the above information and
contact your service representative.

Any further help will be greatly appreciated.

Please reply to this posting via e-Mail to:
  PostMaster@Janus.TechPTA.AC.ZA