🚀 go-pugleaf

In <328FF292.5483@onaustralia.com.au>, Brendan Eales <eales@onaustralia.com.au> writes:
>Ihave been unable to get the Dial Other ISP dialer to work.
>In verbose mode it seems that the only NAK I get back is the MagicNumber
>request.
>So I installed In-Joy from the Nov96 Hobbes Archived CD and still
>couldn't get in. InJoy gives me an Invalid Protocol line repeatedlyThe
>following lines are from the InJoy trace log.
>> 16:48:26:10: Initialising PPP packet mode
>> 16:48:26:16: Initialising PPP...
>> 16:48:26:22: PPP: Enabling VJ compression

My isp has VJ compression turned off

Derek


>> 16:48:26:29: TX: CONFIG-REQ (periodic), id = 50
>> 16:48:26:41: SENDING OUTGOING PPP PACKET (SIZE = 36)
>> 16:48:26:50: LINE_MON: TRANSMIT DATA
>> 16:48:27:10: Priority - class 4, delta = 16
>> 16:48:27:32: LINE_MON: RECEIVE DATA
>> 16:48:27:38: RX: LCP PACKET - id = 50
>> 16:48:27:44: RX: CONFIG_REQ
>> 16:48:27:50: OPTION -> LCPOPTION_ACCM -> ACCM = 0
>> 16:48:27:57: OPTION -> LCPOPTION_ADDRESSCOMP
>> 16:48:27:63: OPTION -> LCPOPTION_PROTCOMP
>> 16:48:27:69: TX: LCP PACKET, id = 50, code = 2
>> 16:48:27:75: SENDING OUTGOING PPP PACKET (SIZE = 35)
>> 16:48:27:85: LINE_MON: TRANSMIT DATA
>> 16:48:27:91: PPP: Invalid protocol 0x820
>> 16:48:28:00: LINE_MON: RECEIVE DATA
>> 16:48:28:07: LINE_MON: RECEIVE DATA
>> 16:48:28:13: PPP: Invalid fcs
>> 16:48:28:22: PPP: Invalid protocol 0x820
>> 16:48:28:29: TX: CONFIG-REQ (periodic), id = 51
>Don't know if this means anything.It doesn't say MagicNumber like the
>Dialer.
>Anyway I know that I used to be able to use the dialer and now I can't.
>I had previously installed Warp V4 over my Red Box V3 and I was able to
>use the dialer. Now with V4 installed on a clean c: drive with all
>DOS/Win on a separate C: and boot manager I can't connect.
>Any help would be greatly appreciated.