🚀 go-pugleaf

In message <468s3v$dne@ryu.communique.net> - mango@ryu.communique.net (Raul Zig
helboim) writes:
>
>	I bet this is not OS/2 related, but I'll ask anyway...
>
>	If I enable hardware flow control on my modem (any modem, I have tried 
>	3 different brands) using the AT&K3 command, I am not able to go past
>	the CONNECT xxxx string. If I press a key, I can see the lights on the
>	modem blick, but nothing else happens.
>
>	If I disable hardware flow control (AT&K0), I have no problems whatsoever,
>	except that I loose characters and that 'xxxx' on 'CONNECT xxxx' is li-
>	mited to 38400.
>
>	(I am using unregistered copy of the latest SIO drivers, so xxxx could be
>	115000, and it is in some ocasions).
>
>	Hints ?
>-- 
>-----------------------------------------------------------------------------
>Raul Zighelboim                         e-mail:    mango@communique.net  
>Communique Inc.                            Tel:    504.527.6200
>Technical Specialist                       Fax:    504.527.6030 


You didn't specify wether you have internal or external modems. I'll
assume you have external modems.

Make sure you have buffered 16550 type UARTs in your box. If you are sure
you have these, try a different cable.

Regards,
Tim