V4 PPP and MagicNumbers

Thread View: comp.os.os2.comm

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Brendan Eales Sun, 17 Nov 1996 00:00

#18

Author: Brendan Eales
Date: Sun, 17 Nov 1996 00:00

36 lines
2267 bytes

Ihave been unable to get the Dial Other ISP dialer to work.
In verbose mode it seems that the only NAK I get back is the MagicNumber
request.
So I installed In-Joy from the Nov96 Hobbes Archived CD and still
couldn't get in. InJoy gives me an Invalid Protocol line repeatedlyThe
following lines are from the InJoy trace log.
> 16:48:26:10: Initialising PPP packet mode
> 16:48:26:16: Initialising PPP...
> 16:48:26:22: PPP: Enabling VJ compression
> 16:48:26:29: TX: CONFIG-REQ (periodic), id = 50
> 16:48:26:41: SENDING OUTGOING PPP PACKET (SIZE = 36)
> 16:48:26:50: LINE_MON: TRANSMIT DATA
> 16:48:27:10: Priority - class 4, delta = 16
> 16:48:27:32: LINE_MON: RECEIVE DATA
> 16:48:27:38: RX: LCP PACKET - id = 50
> 16:48:27:44: RX: CONFIG_REQ
> 16:48:27:50: OPTION -> LCPOPTION_ACCM -> ACCM = 0
> 16:48:27:57: OPTION -> LCPOPTION_ADDRESSCOMP
> 16:48:27:63: OPTION -> LCPOPTION_PROTCOMP
> 16:48:27:69: TX: LCP PACKET, id = 50, code = 2
> 16:48:27:75: SENDING OUTGOING PPP PACKET (SIZE = 35)
> 16:48:27:85: LINE_MON: TRANSMIT DATA
> 16:48:27:91: PPP: Invalid protocol 0x820
> 16:48:28:00: LINE_MON: RECEIVE DATA
> 16:48:28:07: LINE_MON: RECEIVE DATA
> 16:48:28:13: PPP: Invalid fcs
> 16:48:28:22: PPP: Invalid protocol 0x820
> 16:48:28:29: TX: CONFIG-REQ (periodic), id = 51
Don't know if this means anything.It doesn't say MagicNumber like the
Dialer.
Anyway I know that I used to be able to use the dialer and now I can't.
I had previously installed Warp V4 over my Red Box V3 and I was able to
use the dialer. Now with V4 installed on a clean c: drive with all
DOS/Win on a separate C: and boot manager I can't connect.
Any help would be greatly appreciated.

Re: V4 PPP and MagicNumbers

#19

Author: Lionel Parker
Date: Mon, 18 Nov 1996 00:00

21 lines
1336 bytes

Brendan Eales (eales@onaustralia.com.au) wrote:
: Ihave been unable to get the Dial Other ISP dialer to work.
: In verbose mode it seems that the only NAK I get back is the MagicNumber
: request.
: So I installed In-Joy from the Nov96 Hobbes Archived CD and still
: couldn't get in. InJoy gives me an Invalid Protocol line repeatedlyThe
: following lines are from the InJoy trace log.
<snap>
: Any help would be greatly appreciated.

I don't have any problems with DOIP but I can't get In-Joy to work.
If you e-mail me the details of what you have tried with warp DOIP I'll
see what I can figure out.  In my case It was totally painless.

What modem do you use?  What initiallisation strings did you specify?
Does your ISP use PAP?

Regards,

Lionel at Lismore.

Re: V4 PPP and MagicNumbers

#20

Author: John Summerfield
Date: Mon, 18 Nov 1996 00:00

21 lines
1289 bytes

Brendan Eales <eales@onaustralia.com.au> writes:
?Ihave been unable to get the Dial Other ISP dialer to work.

?Anyway I know that I used to be able to use the dialer and now I can't.
?I had previously installed Warp V4 over my Red Box V3 and I was able to
?use the dialer. Now with V4 installed on a clean c: drive with all
?DOS/Win on a separate C: and boot manager I can't connect.
?Any help would be greatly appreciated.

The Rexx programs in my web pages work at iiNet with Warp 4.

Try them.


Cheers
John Summerfield
Warped & Connected
Perth, Western Australia
OS2 support @ http://www.iinet.net.au/~summer
Unsolicited sales messages cost you $US1000

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads