🚀 go-pugleaf

In article <1993Jan23.141618.16770@informatik.uni-wuerzburg.de> alex@physik.uni-wuerzburg.de (Alexander Jung) writes:
>
>but when I try to install it I wont get further than disk1.
>I can boot from disk0, and at that deep blue IBM screen
>I insert disk1 as I'm asked to. Then the black screen
>with those four os2-logos appears and a 
>message 'loading please wait' . After some floppy
>activity the logos go away and only the 'Loading,
>please wait' is in the upper third of the screen.
>Shortly after that the machine stops with the following
>error:
>The system detected an internal processing
>error at location ##0160:fff60967 - 000d:9967
>60000, 9084
>
>048600b4
>Internal revision 6.479, 92/12/09
>The system is stopped. Record the location number
>of the error and contact your service representative
>
>After that only a cold reboot brings the machine
>back to life.
>my setup is: 486DX/50,128K Cache, 16MB, ET4000 1MB,
>Maxtor 210MB AT-bus, Logitech serial Mouse
>

Interesting.  I once had a trap 000e with an internal processing error 
at the very same location, with the 2.1 beta, when trying to
shot it off (2.1 beta).  I got all the flags noted somewhere; but
the problem is not reproducible.

I had no difficulty (i.e., no unexpected difficulty, which is not to
say that I approve of the installation procedure, especially the
cryptic fdisk options) to install 2.1, though.

Luc B