🚀 go-pugleaf

Wow!  Look what I started...  (I kinda forgot about this thread - sorry
guys...)  I have been "talking" with a few other people in the os/2 tcpip
group regarding getting a box attached to an NT network.  (I finally managed
to get Warp v4 installed on one! <@work though...  still can't get it to run
on my hardware here @home...  :(  )

In anycase though - since I did remember to re-visit this group (I ~thought~
that maybe I posted something in here...) I see that there has been some
banter regarding the original question about the sb drivers - the open source
thing looks promising - lets hope that someone does write some drivers for the
sb cards!

Anyway - sorry for not expressing my appreciation for the help guys - I just
forgot to check back... {shrug shoulders}

-=- J.D. -=-


Jim Danvers wrote:

> Hi guys...
>
> I just installed Warp 3 (blue spine) and am trying (hoping) to get audio
> running on this box - it has a Creative Labs Sound Blaster PCI 128 card in
> it and I have not been able to locate any info on getting it running as
> yet.  I'm dual booting this box @present w/Win95 and the audio card works
> fine.
>
> Anyone have any pointers or suggestions?
>
> Thanks in advance....
>
> -=- J.D. -=-
>
> Doug Bissett wrote:
>
> > On Fri, 12 Nov 1999 15:35:20, rcrane@octa4.net.au (Richard A Crane)
> > wrote:
> >
> > > Can anyone comment on the working off/difficulties in
> > > getting  working any of the following: ISA AW37-3D cyrstal
> > > chipset card: PCI AW230 4280 Cyrstal Chipset card; or Yamaha
> > > YME744 card or Aztech 368 DSP PCI card?
> > > Richard A Crane
> > > Barrister & Solicitor
> > > slightly altered email (anti-spamming) rcrane AT
> > > octa4.net.au
> > > OR rcrane AT attglobal.net
> >
> > I have used a few AW37 cards, with good success. Go to:
> > http://www.cirrus.com/drivers/audiodrv/
> > to get the OS/2 driver (Use the FM driver, it works better than the WT
> > driver).
> >
> > Hope this helps...
> > ******************************
> > From the PC of Doug Bissett
> > doug.bissett at attglobal.net
> > The " at " must be changed to "@"
> > ******************************