Thread View: comp.os.os2.misc
8 messages
8 total messages
Started by Keith Bennett
Tue, 24 Jan 1995 20:13
Selective Install hangs system !?
Author: Keith Bennett
Date: Tue, 24 Jan 1995 20:13
Date: Tue, 24 Jan 1995 20:13
12 lines
1310 bytes
1310 bytes
Whenever I try to run Selective Install, my system freezes up and I cannot even reboot. I have to power down. This happens on 2 PC's. It's a 386-33 with 8 MB RAM. Thanks for any help. - Keith -- -------------------------------------------------------------------------- Keith Bennett Bennett Business Solutions, Inc. C++/C Software Development 1852 Middlebridge Drive kbennett@cpcug.org Silver Spring, MD USA 20906
Re: Selective Install hangs system !?
Author: fgm
Date: Wed, 25 Jan 1995 10:48
Date: Wed, 25 Jan 1995 10:48
17 lines
1697 bytes
1697 bytes
In <3g3n0u$i2m@cpcug.org>, kbennett@cpcug.org (Keith Bennett) writes: >Whenever I try to run Selective Install, my system freezes up and I >cannot even reboot. I have to power down. This happens on 2 PC's. >It's a 386-33 with 8 MB RAM. After I got my new CDROM drive the other day, and installed MMPM/2, I can no longer run Selective Install either. The system doesn't hang, but it halts Selective Install with this error: SYS3175 A program generated an access violation at 17b7930c OS2MM.DLL 0001:0002930c blah...blah...blah I haven't tried disabling MMPM/2 yet, but I will get around to it and see if that corrects the problem, and report back. -- Francis Morley fgm@unixg.ubc.ca Team OS/2
Re: Selective Install hangs system !?
Author: Steve Newell
Date: Wed, 25 Jan 1995 16:14
Date: Wed, 25 Jan 1995 16:14
17 lines
1583 bytes
1583 bytes
In message <3g3n0u$i2m@cpcug.org> - kbennett@cpcug.org (Keith Bennett) writes: >Whenever I try to run Selective Install, my system freezes up and I >cannot even reboot. I have to power down. This happens on 2 PC's. >It's a 386-33 with 8 MB RAM. > I had a similar problem. In my case it was a conflict with my NE2000 ethernet board. It seems that one of the Warp device drivers is hardwired to IO address 0x320. My NIC was also using that address. My quick solution was to remove the NIC and run install. (I couldn't change the IO address on the NIC 'cause I couldn't find the documentation, and I was in a hurry. I have since fixed that.) Hope this helps. Steve Newell
Re: Selective Install hangs system !?
Author: CN Lam
Date: Wed, 25 Jan 1995 17:05
Date: Wed, 25 Jan 1995 17:05
28 lines
2015 bytes
2015 bytes
fgm@unixg.ubc.ca wrote: : In <3g3n0u$i2m@cpcug.org>, kbennett@cpcug.org (Keith Bennett) writes: : >Whenever I try to run Selective Install, my system freezes up and I : >cannot even reboot. I have to power down. This happens on 2 PC's. : >It's a 386-33 with 8 MB RAM. : After I got my new CDROM drive the other day, and installed MMPM/2, I can : no longer run Selective Install either. The system doesn't hang, but it halts : Selective Install with this error: : SYS3175 : A program generated an access violation at 17b7930c OS2MM.DLL 0001:0002930c : blah...blah...blah : I haven't tried disabling MMPM/2 yet, but I will get around to it and see if that : corrects the problem, and report back. : -- : Francis Morley fgm@unixg.ubc.ca Team OS/2 I'm experiencing exactly the same problem. I've tried disabling MMPM/2 and have even reinstalled OS/2 after formatting my OS/2 partition, but the same SYS3175 error keeps coming back! Any help would be appreciated! Regards, Chung Nian
Re: Selective Install hangs system !?
Author: Jani Patanen
Date: Thu, 26 Jan 1995 21:13
Date: Thu, 26 Jan 1995 21:13
10 lines
1280 bytes
1280 bytes
fgm@unixg.ubc.ca wrote: > no longer run Selective Install either. The system doesn't hang, but it halts > Selective Install with this error: > SYS3175 > A program generated an access violation at 17b7930c OS2MM.DLL 0001:0002930c Put config.sys and autoexec.bat on every hard drive's root dir. that will fix the problem
Re: Selective Install hangs system !?
Author: ~name
Date: Tue, 31 Jan 1995 13:09
Date: Tue, 31 Jan 1995 13:09
48 lines
2363 bytes
2363 bytes
<3g60dj$jg0@nuscc.nus.sg> Organization: IQuest Network Services X-Newsreader: WinVN 0.91.6 I've got the same problem. I called IBM and this problem doesn't have anything to do with MMPM/2. Instead, according to their experts, OS/2 is not able to "see" DOS if you've installed OS/2 in different primary partitions. But, I don't believe it!! In article <3g60dj$jg0@nuscc.nus.sg>, law30118@leonis.nus.sg (CN Lam) says: > >fgm@unixg.ubc.ca wrote: >: In <3g3n0u$i2m@cpcug.org>, kbennett@cpcug.org (Keith Bennett) writes: >: >Whenever I try to run Selective Install, my system freezes up and I >: >cannot even reboot. I have to power down. This happens on 2 PC's. >: >It's a 386-33 with 8 MB RAM. > >: After I got my new CDROM drive the other day, and installed MMPM/2, I can >: no longer run Selective Install either. The system doesn't hang, but it halts >: Selective Install with this error: > >: SYS3175 >: A program generated an access violation at 17b7930c OS2MM.DLL 0001:0002930c >: blah...blah...blah > >: I haven't tried disabling MMPM/2 yet, but I will get around to it and see if that >: corrects the problem, and report back. >: -- >: Francis Morley fgm@unixg.ubc.ca Team OS/2 > > >I'm experiencing exactly the same problem. > >I've tried disabling MMPM/2 and have even reinstalled OS/2 after >formatting my OS/2 partition, but the same SYS3175 error keeps coming back! >Any help would be appreciated! > >Regards, >Chung Nian >
Re: Selective Install hangs system !?
Author: 165.154.51.1
Date: Wed, 01 Feb 1995 23:06
Date: Wed, 01 Feb 1995 23:06
16 lines
1883 bytes
1883 bytes
>: SYS3175 >: A program generated an access violation at 17b7930c OS2MM.DLL 0001:0002930c >: blah...blah...blah > Make sure that warp cant see ANY autoexec.bat files on any other drives. This problem has nothing to do with multimedia. On my system, warp is on a large primary partition, dos is on a small primary partition and all of my dos/windows software is on another partition which both operating systems can see but they cant see each other. If there is an autoexec.bat file but no config.sys file on the data drive then selective install will hang every time. It was explained to me this way: selective install will look recursively for config.sys after finding a copy of autoexec.bat until it runs out of stack space and it traps. In other words delete or rename any copies of autoexec.bat and config.sys and everything will run smoothly David Kimmel djkimmel@wat.hookup.net
Re: Selective Install hangs system !?
Author: Robert L Layton
Date: Thu, 02 Feb 1995 05:59
Date: Thu, 02 Feb 1995 05:59
32 lines
2195 bytes
2195 bytes
CN Lam (law30118@leonis.nus.sg) wrote: : fgm@unixg.ubc.ca wrote: : : In <3g3n0u$i2m@cpcug.org>, kbennett@cpcug.org (Keith Bennett) writes: : : >Whenever I try to run Selective Install, my system freezes up and I : : >cannot even reboot. I have to power down. This happens on 2 PC's. : : >It's a 386-33 with 8 MB RAM. : : After I got my new CDROM drive the other day, and installed MMPM/2, I can : : no longer run Selective Install either. The system doesn't hang, but it halts : : Selective Install with this error: : : SYS3175 : : A program generated an access violation at 17b7930c OS2MM.DLL 0001:0002930c : : blah...blah...blah : : I haven't tried disabling MMPM/2 yet, but I will get around to it and see if that : : corrects the problem, and report back. : : -- : : Francis Morley fgm@unixg.ubc.ca Team OS/2 : I'm experiencing exactly the same problem. : I've tried disabling MMPM/2 and have even reinstalled OS/2 after : formatting my OS/2 partition, but the same SYS3175 error keeps coming back! : Any help would be appreciated! : Regards, : Chung Nian I get the same error, be curious to know if anyone can solve it because IBM can't. Rob
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads