Thread View: comp.os.os2.misc
6 messages
6 total messages
Started by Morten Fordsmand
Wed, 05 Apr 2000 00:00
FP13 experiences
Author: Morten Fordsmand
Date: Wed, 05 Apr 2000 00:00
Date: Wed, 05 Apr 2000 00:00
7 lines
954 bytes
954 bytes
To date my experiences after applying fp13. Object rexx semmes to broken as REXXUTIL.DLL imports REXXCRT.158, which unfortunalty dosn't exist. Theseus/3 dont work. /Morten Foprdsmand
Re: FP13 experiences
Author: Alex Taylor
Date: Wed, 05 Apr 2000 00:00
Date: Wed, 05 Apr 2000 00:00
12 lines
897 bytes
897 bytes
On Wed, 05 Apr 2000 14:10:12 -0400, Morten Fordsmand <mfo@finanssystem.dk> wrote: <snips> >Theseus/3 dont work. Probably for the same reason it's broken under WSeb; I believe that's a known issue... -- -------------------------- Alex Taylor alex@eddie.cis.uoguelph.ca --------------------------
New Theseus 3 (was Re: FP13 experiences)
Author: Buddy Donnelly
Date: Wed, 05 Apr 2000 00:00
Date: Wed, 05 Apr 2000 00:00
24 lines
1504 bytes
1504 bytes
On Wed, 5 Apr 2000 15:23:30, Chuck McKinnis <postmaster@127.0.0.1>
(Chuck McKinnis) wrote:
> Theseus has been updated.
>
> ftp://service.software.ibm.com/ps/products/os2/fixes/v4warp/theseus3
As of today, in fact. Wow.
Full file link for download is:
ftp://service.software.ibm.com/ps/products/os2/fixes/v4warp/theseus3/t
hes3002.exe (this line probably wraps)
Apr 5 8:57 1,162,444 � thes3002.exe
Apr 5 8:57 2,041 � readme
--
Good luck,
Buddy
Buddy Donnelly donnelly@tampabay.rr.com
Re: FP13 experiences
Author: mixxerdw
Date: Wed, 05 Apr 2000 00:00
Date: Wed, 05 Apr 2000 00:00
10 lines
1086 bytes
1086 bytes
It seems mixxerdw@eye_eye_echs.com keyed the following on Wed, 5 Apr 2000 14:32:00: > It seems Morten Fordsmand <mfo@finanssystem.dk> keyed the following on Wed, 5 Apr 2000 18:10:12: > > > Theseus/3 dont work. > > There is a new Theseus since 3000, 3002 that is reported to overcome this problem. ftp://service.software.ibm.com/ps/products/os2/fixes/v4warp/theseus3/ > =Dwight= X1=L, X2=L & the domain is phonetic
Re: FP13 experiences
Author: mixxerdw
Date: Thu, 06 Apr 2000 00:00
Date: Thu, 06 Apr 2000 00:00
10 lines
1428 bytes
1428 bytes
It seems Morten Fordsmand <mfo@finanssystem.dk> keyed the following on Thu, 6 Apr 2000 11:18:31: > What I mean is that the REXXUTIL imports ordinals 158 & 159 from > REXXCRT, thees however are not exported from the REXXCRT in the fixpack. > Gotcha! Thanks - (and confirmed) - it doesn't break OREXX in general, but it does kill several (not all) of the Sys functions. I have some processes that really won't do to go back to Classic, so I will experiment with back-leveling the .dll. (If I count correctly, there were a total of 11 REXX files updated. I am hopefull that a full step back will not be needed, since FP13 fixed several non-REXX things that were major PITA!) =Dwight= X1=L, X2=L & the domain is phonetic
Re: FP13 experiences
Author: Chuck McKinnis
Date: Fri, 07 Apr 2000 00:00
Date: Fri, 07 Apr 2000 00:00
28 lines
1774 bytes
1774 bytes
The real answer is patchldr.zip (from Daniela) on Hobbes. On Thu, 6 Apr 2000 21:18:46, Mark Ertes <mark.ertes@corecomm.net> wrote: > "Chuck McKinnis (Chuck McKinnis)" wrote: > > > I'm back to not using all of my 128Mb again. > > Chuck, > > The solution recommended to me was to enable the use of the SWAPPER.DAT file with the following line in CONFIG.SYS: > MEMMAN=SWAP,PROTECT > > I also set the initial swap file size at 4MB using this line: > SWAPPATH=C:\OS2\SYSTEM 16384 4096 > > Theseus reported that OS/2 used more that 64MB of DRAM (my PC has 128MB total) as I loaded successively several large apps, but the size of SWAPPER.DAT didn't change from the initial setting noted above. So even though it was "enabled" it was not yet being used! > > Hope this helps. > > Regards, > > Mark Ertes Chuck McKinnis IBM Senior Systems Engineer (retired) mckinnis@attglobal.net http://pws.prserve.net/mckinnis
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads