🚀 go-pugleaf

In <c1.2c.2Z6bvx$017@transit.homeip.net>, bruce@os2box.omen.com.au writes:
>It seems you may have and error in the [networks]. Here is what I have:
>[networks]
>
>  net1 = NETBEUI$,0,LM10,34,100,14
>  net2 = tcpbeui$,1,LM10,34,100,14
>
>Note the numbering, netbeui is '0' and tcpbeui is '1'
>Your requester info is correct, but you also need an entry in the [peer] as well:
>  srvnets = NET1,NET2

  I didn't say that my "adapter 0" is a dialup adapter for a ppp 
telephone dial-in for a NFS linkup sometimes.  That was done on the 
advice of Bill Kredenster who posts in comp.os.os2.networking.tcpip 
some time back.  Net1 on 1 is therefore where the LAN netbeui was 
placed.  Therefore Net2 tcpbeui had to be placed on 2.

  I am somewhat confused in that before Xmas when I last had a go at 
this, placing srvnets = NET1,NET2 in peer stopped peer working at all. 
This time I have put in this line but have added an assignment to
SRVSERVICES in peer to = PEER (rather than the default blank) I don't 
know that whether this upsets correct workings.

  Can I take it that you can get Linux to client onto OS/2?  If so 
then I can be confident it's only a matter of detail to get the whole 
lot to work.

TIA

Victor Bien
VCB Computing Alternatives (R)
http://sydney.dialix.com.au/~vcbien/