🚀 go-pugleaf

Injoy Connect

I would appreciate help and advice with respect to Injoy Connect

I have managed to successfully install and set up Injoy Connect (IC)  so that
I can dial in remotely via Injoy Professional to the IC computer.. and I can
ping that "box" and can "ping" my own machine back!  What I am unable to do
is to understand the routing concepts to allow me to then 'jump' or 'hop'
(call it what you will)  to the LAN.

Details....

1	LAN at office using Warp Server for e business  Fixpack 2 and TCPIP
4.3
	IP network using the 192.168.1.xxx system where 192.168.1.100 is the 
file server
	Protocols are 		Netbios
				TCPIP
				Netbios over TCPIP

(I am still running netbios as  well as Netbios over TCPIP)

2	Injoy Connect is running on a Network PC (where its LAN IP address
is 192.168.1.2  - ie this machine is NOT the actual server box
(192.168.1.100) but rather a network PC 

3	The Injoy Connect  PPP network is set up so that the IC server IP is
10.2.2.10

4	The user  (ie me at home) has an  assigned PPP address of 10.2.2.1

so far I can dial in from home using Injoy  to the office LAN PC (using Injoy
Connect) and the modem answers and negotiates and I am then logged onto the
PPP network with a  default gateway IP 10.2.2.10 and a user IP of
10.2.2.1.....

but I cant 'see' the LAN network  (the 192.168.1.xxx ) 

how do I do this?

what do I need to set up on my home (remote) PC if anything and what do I
need to set up on the Injoy Connect PC at the office so that I can access the
LAN?

I know it is to do with "routing"  but there my knowledge stops!!

I presume that on the Injoy Connect Box I specify that the  final destination
is 192.168.1.100 and that the router is 10.2.2.10..?  Is this a "default" or
"net' or "subnet" and how many hops do I specify ? 1 or 2...??

what do I need to set up on the remote pc at home? no change presumably?


Graham Norton FRACP
gn@smart-road.com.au
Neurologist
Australia
"If I want a window on the brain, I use OS2"