🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.os.os2.networking
Article #1417

Re: Remote printing problem

#1417
From: Dean Pentcheff
Date: Mon, 25 Jan 1993 16:14
54 lines
3038 bytes
krking@fuji.mitre.org (Kenneth R. King) writes:
>I installed TCP/IP vers. 1.2.1 on my IBM Model 90 running
>OS/2 2.0 with no problems (thanks to Dean Pentcheff's notes).
>I added "RUN=C:\TCPIP\BIN\LPRMON.EXE -b lpt1" to my config.sys file
>to enable remote printing through a unix host.  I setup the OS/2
>Print Manager to print through lpt1: using an Apple NTX print
>driver.  The Printer-specific format is selected in the PMPRINT
>queue driver settings.
>
>Everything works fine when printing from DOS applications (Quatro Pro 3.0) 
>with a postscript print driver thru lpt1:.  However, when printing 
>from Word-for-Windows, I get a text image of the postscript file.
>
>I checked the 2.0 FAQ file as well as old postings for hints.  I
>tried disabling the WinOs/2 print manager by removing !printman
>from the MAVDMapps line in the windows sys.ini file.
>
>Any help would be appreciated.
>
>Ken King
>krking@linus.mitre.org

I'm not sure what the problem is, but I can tell you that a similar
setup on our system works fine (for Quattro and WfW).  Here are some
details from our setup.  We're running OS/2 2.0 + SP with TCP/IP
including all the latest and greatest CSDs from hobbes.nmsu.edu.

ON THE REMOTE MACHINE (without the printer attached):
        The target printer is "hp3ps" on machine "fidder".
        In \startup.cmd:
                start lprmon -b -php3ps -sfiddler lpt1
        Printer icon settings:
                printer driver: PSCRIPT.HP Laserjet III v52_2
                job properties: default
                output: LPT1
                queue options: driver = PMPRINT; print-while-spooling = on
                print options: default
        WinOS/2:
                ATM on (turned on and fonts installed from floppy disk)
                control panel, printers, Use print manager = off;
                        appropriate printer drivers installed and active
ON THE MACHINE WITH THE PRINTER ATTACHED:
        Pretty much the same setup, except that the printer icon
              has "printer specific format" turned on (is this needed?
              I don't really know...)


Good luck!

-Dean
--
[NOTE: my email address is different from where I read and post net news.]
Dean Pentcheff  (Internet: dean2@tbone.biol.scarolina.edu) (803) 777-8998
Department of Biology, University of South Carolina, Columbia SC 29205
Technical Details
Message-ID: <1k13l8INNkkm@shelley.u.washington.edu>
Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!news.u.washington.edu!milton.u.washington.edu!fhl
References: <1993Jan24.174421.28551@linus.mitre.org>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!news.u.washington.edu!milton.u.washington.edu!fhl
From: fhl@milton.u.washington.edu (Dean Pentcheff)
Newsgroups: comp.os.os2.networking
Subject: Re: Remote printing problem
Message-ID: <1k13l8INNkkm@shelley.u.washington.edu>
Date: 25 Jan 93 16:14:32 GMT
Article-I.D.: shelley.1k13l8INNkkm
References: <1993Jan24.174421.28551@linus.mitre.org>
Sender: Dean Pentcheff
Reply-To: dean2@tbone.biol.scarolina.edu (Dean Pentcheff)
Followup-To: comp.os.os2.networking
Organization: Department of Biology, University of South Carolina, Columbia
Lines: 54
NNTP-Posting-Host: milton.u.washington.edu