🚀 go-pugleaf

In article <5306@blue.cis.pitt.edu.UUCP>, sillett@edc3jr.gsph.pitt.edu (Robert L. Sillett) writes:
|> 
|> I've configured IBM's TCP/IP 1.2.1 to run along with the Novell
|> Requester on the same NIC (3C503) using ODINSUP.  It works great --
|> for 90 or seconds.  Then all the TCP/IP+NFS functions stop working.  I
|> know that this is a known problem to IBM & Novell; however, is it a
|> problem with the 3COM drivers or with the software?
|> 
|> Thanks in advance.
|> 
|> --- Bob
|> 
|> -- 
|> | Robert Sillett                  Internet:    sillett@edc3jr.gsph.pitt.edu  |
|> | Systems Analyst              US Mail:     127 Parran Hall               |
|> | University of Pittsburgh                     130 DeSoto St.                |
|> | Epidemiology Data Center                     Pittsburgh, PA  15261         |

This is a known problem (to some anyway) at IBM and Novell.  Novell has
issued an updated ODINSUP.SYS and IBM new IFNIS.SYS and INET.SYS files.

The IBM mods break a couple of other things like bootp, slip and netstat.

Perhaps the new ODINSUP alone will fix the problem.

You can refer to my IBM problem 3x351 if you like.

Have the TCP/IP support queue contact James Ting at IBM Novell support
in Austin.


-- 
David Kolb                    Opinions are my own not SAS'
SAS Institute, Inc.           EMAIL:      sasdxk@unx.sas.com
SAS Campus Drive - J206       Phone:      (919) 677-8000 x6827
Cary, NC  27513-2414 USA      FAX:        (919) 677-8123