🚀 go-pugleaf

schmidts@Informatik.TU-Muenchen.DE (Stefan Schmidt StS) writes:


>subject says it all.
>could someone please post or email a summary?
>(ibm tcp/ip 1.2.1)

>__________________________________________________
>Stefan Schmidt, schmidts@informatik.tu-muenchen.de
>  Technische Universitaet Muenchen, Deutschland


Ditto, ditto, ditto.

Steve
-- 

Steve Kellmeyer 
kellmeye@ux1.cso.uiuc.edu

In <C1C977.M7A@ux1.cso.uiuc.edu> kellmeye@ux1.cso.uiuc.edu (kellmeyer steven l) writes:

>schmidts@Informatik.TU-Muenchen.DE (Stefan Schmidt StS) writes:


>>subject says it all.
>>could someone please post or email a summary?
>>(ibm tcp/ip 1.2.1)

>>__________________________________________________
>>Stefan Schmidt, schmidts@informatik.tu-muenchen.de
>>  Technische Universitaet Muenchen, Deutschland


>Ditto, ditto, ditto.

>Steve

I am still trying to get it to work. I only have time to try this
once a week and without the proper documentation (as I am using
betas from Nov PDK CDROM) doesn't help at all.

I'll update if I get these working together.

Now for some experience ...... my OS/2 PC saved the day last week
when one of the Novell supervisors in a place I work for deleted
a lot of stuff in the /LOGIN directory ( as well as some others
) accidentally. And as a result, no one can login to the Novell 3.11
server anymore from DOS PCs BUT NOT my OS/2 box as it has its own
login programs and this saves the day in restoring what was deleted.

-- 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>Wey Jing Ho    Tel: 61-3-565-3615   E-mail : sci240s@monu6.cc.monash.edu.au<
>  Physics Dept, Monash Univ, Wellington Rd, Clayton, VIC 3168, AUSTRALIA   <
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In article <C1C977.M7A@ux1.cso.uiuc.edu> kellmeye@ux1.cso.uiuc.edu (kellmeyer steven l) writes:
>schmidts@Informatik.TU-Muenchen.DE (Stefan Schmidt StS) writes:
>
>
>>subject says it all.
>>could someone please post or email a summary?
>>(ibm tcp/ip 1.2.1)
>
>>__________________________________________________
>>Stefan Schmidt, schmidts@informatik.tu-muenchen.de
>>  Technische Universitaet Muenchen, Deutschland
>
>
>Ditto, ditto, ditto.
>
>Steve
>-- 
>
>Steve Kellmeyer 
>kellmeye@ux1.cso.uiuc.edu

Hope this stuff helps, guys.  It was a bitch, but I got
Requester to work with TCP/IP for OS/2 1.2.1.  Below are The 
Big Three:  CONFIG.SYS, NET.CFG, and PROTOCOL.INI.

Before I say anything else, I hope to hell that after
making these changes that your machine doesn't
boot up with a register dump or some stupid message
like "unable to locate Country.sys," or anything else
which stops you in your tracks.  Please make sure you
have a floppy boot disk handy (I prefer makeboot.cmd
myself.)  Good luck.

General points:  Don't let ICAT or LAPS alter your config.sys.
Add the appropriate lines and include \TCPIP... and \IBMCOM...
in the necessary path statements.

Setup:  I'm using an NE2000 NIC (there's a NE2000.NIF on hobbes for
LAPS).  This setup works with 2.1b (as long as OS/2 is not
loaded on Drive E: for some wierd reason).  I'm superstitious
about the INET.SYS and IFNDIS.SYS files, making sure I use
the same ones with each new install.  Don't have any idea
why that is though.

CONFIG.SYS  (Notice that all the TCPIP and IBMCOM stuff is
at the end of the file, after the requester stuff.)

IFS=D:\OS2\HPFS.IFS  /CACHE:512 /CRECL:4 /AUTOCHECK:D
PROTSHELL=D:\OS2\PMSHELL.EXE
SET USER_INI=D:\OS2\OS2.INI
SET SYSTEM_INI=D:\OS2\OS2SYS.INI
SET OS2_SHELL=D:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS
SET RUNWORKPLACE=D:\OS2\PMSHELL.EXE
SET COMSPEC=D:\OS2\CMD.EXE
LIBPATH=.;D:\OS2\DLL;D:\OS2\MDOS;D:\;D:\OS2\APPS\DLL;D:\NETWARE;
D:\TCPIP\DLL;D:\IBMCOM\DLL;D:\TALKTHRU\PROGRAMS;
SET PATH=D:\OS2;D:\OS2\SYSTEM;D:\OS2\MDOS\WINOS2;D:\OS2\INSTALL;
D:\;D:\OS2\MDOS;D:\OS2\APPS;L:\OS2;P:\OS2;D:\NETWARE;D:\TCPIP\BIN;
D:\IBMCOM;d:\tools\utilities;D:\TALKTHRU\PROGRAMS;
SET DPATH=D:\OS2;D:\OS2\SYSTEM;D:\OS2\MDOS\WINOS2;D:\OS2\INSTALL;
D:\;D:\OS2\BITMAP;D:\OS2\MDOS;D:\OS2\APPS;D:\NETWARE;D:\IBMCOM;
SET PROMPT=$i[$p]
SET HELP=D:\OS2\HELP;D:\OS2\HELP\TUTORIAL;D:\TCPIP\HELP;
SET GLOSSARY=D:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
SET DIRCMD=/O:GN
DEVICE=D:\OS2\TESTCFG.SYS
DEVICE=D:\OS2\DOS.SYS
DEVICE=D:\OS2\PMDD.SYS
BUFFERS=30
IOPL=YES
DISKCACHE=512,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=D:\OS2\SYSTEM 2048 2048
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,D:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=OS2DASD.DMD
SET BOOKSHELF=D:\OS2\BOOK
SET EPMPATH=D:\OS2\APPS
SET FAXPM=D:\OS2\APPS
REM DEVICE=D:\OS2\APPS\SASYNCDA.SYS 
PROTECTONLY=NO
SHELL=D:\OS2\MDOS\COMMAND.COM D:\OS2\MDOS /P /E:1024
FCBS=16,8
RMSIZE=640
DEVICE=D:\OS2\MDOS\VEMM.SYS    
DOS=LOW,NOUMB
DEVICE=D:\OS2\MDOS\VDPX.SYS    
DEVICE=D:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=D:\OS2\MDOS\VDPMI.SYS    
DEVICE=D:\OS2\MDOS\VWIN.SYS    
DEVICE=D:\OS2\MDOS\VCDROM.SYS    
REM DEVICE=D:\OS2\PCMCIA.SYS 
REM DEVICE=D:\OS2\MDOS\VPCMCIA.SYS 
DEVICE=D:\OS2\MDOS\VMOUSE.SYS    
DEVICE=D:\OS2\POINTDD.SYS 
DEVICE=D:\OS2\MOUSE.SYS SERIAL=COM1 
DEVICE=D:\OS2\COM.SYS                                
DEVICE=D:\OS2\MDOS\VCOM.SYS                                
CODEPAGE=437,850
DEVINFO=KBD,US,D:\OS2\KEYBOARD.DCP
SET VIDEO_DEVICES=VIO_SVGA
DEVICE=D:\OS2\MDOS\VSVGA.SYS

REM --- NetWare Requester statements BEGIN ---
DEVICE=D:\NETWARE\LSL.SYS
RUN=D:\NETWARE\DDAEMON.EXE
DEVICE=D:\NETWARE\NE2000.SYS
DEVICE=D:\NETWARE\IPX.SYS
DEVICE=D:\NETWARE\SPX.SYS
RUN=D:\NETWARE\SPDAEMON.EXE
rem DEVICE=D:\NETWARE\NMPIPE.SYS
rem DEVICE=D:\NETWARE\NPSERVER.SYS
rem RUN=D:\NETWARE\NPDAEMON.EXE NP_COMPUTERNAME
DEVICE=D:\NETWARE\NWREQ.SYS
IFS=D:\NETWARE\NWIFS.IFS
RUN=D:\NETWARE\NWDAEMON.EXE
DEVICE=D:\NETWARE\NETBIOS.SYS
RUN=D:\NETWARE\NBDAEMON.EXE
DEVICE=D:\NETWARE\VIPX.SYS
DEVICE=D:\NETWARE\VSHELL.SYS
REM --- NetWare Requester statements END ---

REM  Below is all the TCPIP and IBMCOM stuff (not before!)

DEVICE=D:\IBMCOM\LANMSGDD.OS2 /I:D:\IBMCOM
DEVICE=D:\IBMCOM\PROTMAN.OS2 /I:D:\IBMCOM
rem  DEVICE=D:\IBMCOM\MACS\NE2000.OS2 /I:D:\IBMCOM

DEVICE=D:\NETWARE\ODINSUP.SYS
RUN=D:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=D:\IBMCOM\LANMSGEX.EXE

SET ETC=D:\TCPIP\ETC
SET TMP=D:\TCPIP\TMP
DEVICE=D:\IBMCOM\PROTOCOL\IFNDIS.SYS
DEVICE=D:\IBMCOM\PROTOCOL\INET.SYS
RUN=D:\TCPIP\BIN\CNTRL.EXE

SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVINFO=SCR,VGA,D:\OS2\VIOTBL.DCP




NET.CFG  (nothing special here)

Link driver ne2000
   protocol ipx 8137 ethernet_ii
   frame ethernet_ii
   int 5
   port 360
   node address 1B198826
  
netware requester
    preferred ecu_joyner_library

protocol odinsup
    bind ne2000

link support 
    buffers 16 1514


PROTOCOL.INI  ****************************
(Don't worry about the LAPS settings during
install.  They only write to the PROTOCOL.INI as
far as I know.)

[PROT_MAN]
 DriverName = PROTMAN$

[IBMLXCFG]
 NE2000_nif = NE2000.nif
 TCPIP_nif = TCPIP.nif

;*----------------------------------------------*
;*------------- PROTOCOL SECTION ---------------*
;*----------------------------------------------*

[TCPIP_nif]
 DriverName = TCPIP$
; Bindings = NE2000_nif
 Bindings = NE2000

;*----------------------------------------------*
;*--------------- MAC SECTION ------------------*
;*----------------------------------------------*

[NE2000]

[NE2000_nif]
 DriverName = MS2000$
 IOBASE = 0x360
 INTERRUPT = 5



-- 
David L. Burke         |   DAVBUR@JOYNER.LIB.ECU.EDU
Systems Admin.         |   Joyner Library, East Carolina University
Greenville, NC  27858  |   OS/2 and ST:TNG are the best on the tube 

In article <1993Jan22.092331.18143@Informatik.TU-Muenchen.DE> schmidts@Informatik.TU-Muenchen.DE (Stefan Schmidt StS) writes:
>From: schmidts@Informatik.TU-Muenchen.DE (Stefan Schmidt StS)
>Subject: coexistence novell and tcp/ip
>Date: Fri, 22 Jan 1993 09:23:31 GMT
>
>subject says it all.
>could someone please post or email a summary?
>(ibm tcp/ip 1.2.1)
>
>__________________________________________________
>Stefan Schmidt, schmidts@informatik.tu-muenchen.de
>  Technische Universitaet Muenchen, Deutschland
>


Hello Stefan,
this is my configuration for CM, TCPIP and NW Requester with NSD201.
No Problems.

Helmut



** CONFIG.SYS: **********************************************************

IFS=C:\OS2\HPFS.IFS /CACHE:384 /CRECL:4 /AUTOCHECK:CDE


REM ******* LAPS:
RUN=C:\OS2\INSTALL\IBMLANLK.EXE C:\OS2\INSTALL\IBMLANLK.LST


RUN=C:\OS2\XCOPY.EXE C:\OS2\OS2*.INI E:\OS2\IniSave
PROTSHELL=C:\OS2\PMSHELL.EXE
SET RESTARTOBJECTS=STARTUPFOLDERSONLY
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=.;C:\OS2\DLL;C:\MUGLIB\DLL;C:\OS2\MDOS;E:\CMLIB\DLL;C:\;C:\OS2\APPS\DLL;C:\IBMCOM\DLL;E:\NETWARE;E:\TCPIP\DLL;
SET PATH=C:\OS2;C:\OS2\CMD;C:\MUGLIB;C:\OS2\SYSTEM;D:\SYSTEM;C:\OS2\MDOS\WINOS2;E:\CMLIB;E:\CMLIB\APPN;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;L:\OS2;P:\OS2;E:\NETWARE;E:\TCPIP\BIN;
SET DPATH=C:\OS2;C:\MUGLIB\DLL;E:\CMLIB;E:\CMLIB\APPN;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\IBMCOM;E:\NETWARE;L:\OS2;
SET PROMPT=$e[32;40m$e[1mrc=$r [$p] $i$e[0m
SET HELP=E:\CMLIB\APPN;C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;E:\TCPIP\HELP;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET THE_HELP=D:\OS2\UTILS\THE\OS2.HLP
SET THE=D:\OS2\UTILS\THE\PROFILE.THE
SET DIRCMD=/O:GN
PRIORITY_DISK_IO=YES
FILES=20
DEVICE=C:\OS2\R0CSDD.SYS


REM ******* LAPS:
DEVICE=C:\OS2\INSTALL\IBMLANLK.SYS C:\OS2\INSTALL\IBMLANLK.LST
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM
DEVICE=C:\ibmcom\protman.os2 /I:C:\ibmcom


DEVICE=C:\OS2\TESTCFG.SYS
DEVICE=C:\OS2\DOS.SYS
DEVICE=C:\OS2\PMDD.SYS
BUFFERS=30
IOPL=YES
DISKCACHE=64,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=E:\SWAPSPACE 2048 4096
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=049,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET DELDIR=C:\DELETE,512 D:\DELETE,1024 E:\DELETE,1024
BASEDEV=PRINT02.SYS
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM2ADSK.ADD
BASEDEV=OS2DASD.DMD
SET BOOKSHELF=C:\OS2\BOOK;
SET EPATH=C:\OS2\APPS
DEVICE=C:\OS2\APPS\SASYNCDB.SYS
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS /E:1000/P
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VCDROM.SYS
DEVINFO=SCR,VGA,C:\OS2\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_VGA
SET VIO_VGA=DEVICE(BVHVGA)
DEVICE=C:\OS2\MDOS\VVGA.SYS
CODEPAGE=850,437
DEVINFO=KBD,GR,C:\OS2\KEYBOARD.DCP
DEVICE=C:\OS2\POINTDD.SYS
DEVICE=C:\OS2\MOUSE.SYS
DEVICE=C:\OS2\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
DEVICE=C:\OS2\MDOS\ANSI.SYS

REM Protokollierung einschalten:
DEVICE=C:\OS2\LOG.SYS
RUN=C:\OS2\SYSTEM\LOGDAEM.EXE



REM ********* Netware Requester ***************
REM --- NETWARE REQUESTER STATEMENTS BEGIN ---
DEVICE=E:\NETWARE\LSL.SYS
RUN=E:\NETWARE\DDAEMON.EXE
DEVICE=E:\NETWARE\TOKEN.SYS
DEVICE=E:\NETWARE\ROUTE.SYS
DEVICE=E:\NETWARE\IPX.SYS
DEVICE=E:\NETWARE\SPX.SYS
RUN=E:\NETWARE\SPDAEMON.EXE
DEVICE=E:\NETWARE\NWREQ.SYS
IFS=E:\NETWARE\NWIFS.IFS
RUN=E:\NETWARE\NWDAEMON.EXE
DEVICE=E:\NETWARE\VIPX.SYS
DEVICE=E:\NETWARE\VSHELL.SYS
DEVICE=E:\NETWARE\ODINSUP.SYS
REM --- NETWARE REQUESTER STATEMENTS END ---


REM ********* Communications Manager ***************
DEVICE=C:\ibmcom\protocol\LANDD.OS2
DEVICE=C:\ibmcom\protocol\LANDLLDD.OS2
DEVICE=E:\CMLIB\ACSLDLAN.SYS
RUN=C:\OS2\EPW.EXE
RUN=C:\ibmcom\protocol\landll.exe
DEVICE=E:\CMLIB\APPN\CMKFMDE.SYS
DEVICE=C:\IBMCOM\PROTOCOL\IFNDIS.SYS
DEVICE=C:\IBMCOM\PROTOCOL\INET.SYS

REM ******* TCPIP
SET ETC=E:\TCPIP\ETC
SET TMP=E:\TCPIP\TMP
RUN=E:\TCPIP\BIN\CNTRL.EXE

REM ******* LAPS:
RUN=C:\ibmcom\protocol\netbind.exe
RUN=C:\ibmcom\lanmsgex.exe

REM ******* TCPIP
SET XFILES=E:\TCPIP\X11
SET USERNAME=
SET HOSTNAME=
SET TELNET.PASSWORD.ID=


CALL=CMD.EXE


** NET.CFG: *************************************************************

Link Driver token
   frame token-ring
   frame token-ring_snap
   node address 400031741015

Link Support
   buffers 14 4210

protocol odinsup
   bind token

protocol stack ipx
   sessions 50
   Sockets 64

PROTOCOL STACK SPX
   Abort Timeout 30000
   Verify Timeout 3000
   Listen Timeout 6000
   Send Timeout 6000
   Retry Count 20
   Sessions 50

Netware Requester
   cache buffers 20
   sessions 8
   request retries 20
   preferred server server_name  

Netware Spooler
   copies 1
   keep
   size 8
   banner
   form feed



** PROTOCOL.INI: ********************************************************


[PROT_MAN]
 DriverName = PROTMAN$

[IBMLXCFG]
 TCPIP_nif = TCPIP.nif
 LANDD_nif = LANDD.NIF

[TCPIP_nif]
 DriverName = TCPIP$
 Bindings = TOKEN

[LANDD_nif]
 DriverName = LANDD$
 Bindings = TOKEN

                                

I found the following settings to be the most crucial, especially the
"protocol odinsup / bind ne2000" part, which the ODINSUP readme claimed
was optional if you only had 1 ODI driver loaded (e.g. it would bind to
the only driver found).  

--Don Loflin

>NET.CFG  (nothing special here)
>
>protocol odinsup
>    bind ne2000

>PROTOCOL.INI  ****************************
>
>[TCPIP_nif]
> Bindings = NE2000

--
Don Loflin
Computation Center - Univ of Texas at Austin
loflin@emx.cc.utexas.edu  |  512-471-3241 x 413