OS2 and 3c509?

Thread View: comp.os.os2.networking

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by CUMMINS JOHN WILLI Wed, 27 Jan 1993 16:12

#1446

Author: CUMMINS JOHN WILLI
Date: Wed, 27 Jan 1993 16:12

12 lines
1059 bytes

If there's anyone out there using a 3c509's internal transceiver, I'd like
some feedback on the protocol.ini file, or anything else that changes when
one goes from the internal transceiver to the external (AUI) port and back.

My network connection changed from AUI to Thinnet (coax), and now I'm dead in
the water.  I did reconfigure the adapter, but the "transceiver = onboard"
chokes my elnk3.os2 driver.  I assume that it makes no difference to the
software whether the transceiver is internal or external on this particular
type of card.  (As long as the card itself is setup correctly)

Anyone?
jc   John Cummins  cummins@a.cs.okstate.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads