OS2 TCPIP and Netware

Thread View: comp.os.os2.networking

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Paul A Gunderson Fri, 18 Jun 1993 20:43

#1511

Author: Paul A Gunderson
Date: Fri, 18 Jun 1993 20:43

34 lines
2020 bytes

I'm hoping someone can shed some light on the problems I've been having.

My system:  generic 386DX 25MHz w/ 8MB RAM, 80MB HD, Diamond Speedstar 24x,
and WD EtherCard Plus Elite 16.

My software:  OS/2 v2.1 march beta (6.498), TCP/IP 1.2.1 (Refresh)
(CSD UN37938, March 3, 1993), Netware Requester (install.exe dated 4/15/93).

My problem(s):  I can get OS/2 to work with either of the two products but
not both at once.  When I have tried both the resulting crash message is:

	Exception in device driver SMC8000$
	Trap 000d
		(etc)
	The system detected an internal processing error at location.
	##0160:ff60a3f - 000d:9a3f.
	60000, 9084

	038600d1

This error invariably hits when the startup.cmd is configuring TCP/IP.

I realize that the ethernet card is probably at fault here, but I'm not
quite sure what I'm doing wrong.  I've done many things that should have
made a difference -- made sure that both packages are using the WD card
correctly, bound 802.2 as the frame type for NET.CFG, found a later
SMC8000.SYS driver, and others.

Any clues?  I guess I'll call Big Blue, too.

----
Paul Gunderson
paulg@csd4.csd.uwm.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads