Re: Division by 0 crashes OS2/2.0

Article View: comp.os.os2.programmer

Article #1402

Back to comp.os.os2.programmer Previous Next

#1402

From: ghenniga
Date: Fri, 04 Sep 1992 16:45

24 lines
1442 bytes

I tried a simple program to test this out:

	PROGRAM TEST
	X1 = 10.0
	X2 = 2.0
	Y1 = X1-5.0*X2
	X3 = X1/Y1
	STOP
	END
I ran it and it gave me the following on the command line:

	run-time error M6103: MATH
- floating-point error: divide by 0

This is with MS Fortran 5.1 on a 486/33...So it appears that the problem is
either specific to your hardware or MS Fortran 5.0. Again, this was with the
protected mode libraries for OS/2 1.3 running under OS/2 2.0.

Gary Hennigan
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=++=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
+= PhD Student, Computational Electromagnetics  | Member: Utilitarian  +=
+= New Mexico State University                  | .signature club      +=
+= email: ghenniga@NMSU.Edu                                            +=

Technical Details

Message-ID: <GHENNIGA.92Sep4094517@ampere.ampere>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!destroyer!fmsrl7!lynx!nmsu.edu!opus!ghenniga

References:

<1992Sep2.163508.17347@tc.cornell.edu> <21529@optima.cs.arizona.edu> <92Sep03.032755.21494@acs.ucalgary.ca> <1992Sep3.131306.13751@tc.cornell.edu>

Show Full Headers

Complete Article Headers

Newsgroups: comp.os.os2.programmer
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!destroyer!fmsrl7!lynx!nmsu.edu!opus!ghenniga
From: ghenniga@NMSU.Edu
Subject: Re: Division by 0 crashes OS2/2.0
In-Reply-To: bai@msiadmin.cit.cornell.edu's message of Thu, 3 Sep 1992 13:13:06 GMT
Message-ID: <GHENNIGA.92Sep4094517@ampere.ampere>
Sender: usenet@nmsu.edu
Reply-To: ghenniga@NMSU.Edu
Organization: New Mexico State University - Electromagnetics Group
References: <1992Sep2.163508.17347@tc.cornell.edu> <21529@optima.cs.arizona.edu>
 <92Sep03.032755.21494@acs.ucalgary.ca>
 <1992Sep3.131306.13751@tc.cornell.edu>
Date: Fri, 4 Sep 1992 16:45:17 GMT
Lines: 26

Reply to Parent Message