Re: Adaptec 2940, 2G disk, CD-ROM and OS install problem: ?!?!

Article View: comp.os.os2.setup.misc

Article #16

Back to comp.os.os2.setup.misc Previous Next

#16

From: Gerben_Wierda
Date: Tue, 31 Oct 1995 13:41

26 lines
1479 bytes

In article <DH4qCE.ADr@RnA.NL> Gerben_Wierda@RnA.NL writes:

There were two problems here, The first was SCSI-trouble. This has been solved.  
And now Windows/NT installs and runs perfectly.

What remains is the OS/2 Warp Connect install problem. It looks like timing  
problems on the SCSI bus. I might try running my board without L1 L2 and at  
75MHz instead of 90MHz. Maybe that helps. All tips to get 

>1) TMC PCI (Triton) Motherboard PCI45IT 1.00 with 256 k pipelined burst 
> cache, Award BIOS 4.50PG, Award PnP extensions 1.0a, 32MB RAM, Pentium 90
>2) Adaptec 2940 Fast SCSI (not wide), terminated
>	a) SCSI ID #0: HP 3725S 2.4GB (raw) SCSI disk
>	b) SCSI ID #2: Toshiba 3601 quadspeed CD-ROM, terminated
>3) Teac floppy drive
>4) Diamond Stealth Video 4MB VRAM (3400)

working are very welcome. I do have the latest aic7870.add driver on my disk  
#1.

Thanks,

-- 
Gerben_Wierda@RnA.nl (Gerben Wierda) NEXTSTEP RD242
"If you don't know where you're going, any road will take you there"
Paraphrased in Alice in Wonderland, originally from the Talmud.

Technical Details

Message-ID: <DHBFD9.H7@RnA.NL>

Path: arc1-ca.pugleaf.net!EU.net!sun4nl!rna-nl!gerben

References: <DH4qCE.ADr@RnA.NL>

Show Full Headers

Complete Article Headers

Newsgroups: comp.os.os2.setup.misc,comp.periphs.scsi
Path: arc1-ca.pugleaf.net!EU.net!sun4nl!rna-nl!gerben
From: Gerben_Wierda@RnA.NL
Subject: Re: Adaptec 2940, 2G disk, CD-ROM and OS install problem: ?!?!
Message-ID: <DHBFD9.H7@RnA.NL>
Sender: gerben@RnA.NL (Gerben Wierda)
Reply-To: Gerben_Wierda@RnA.NL
Organization: G.R.O.S.S.
References: <DH4qCE.ADr@RnA.NL>
Date: Tue, 31 Oct 1995 13:41:33 GMT

Reply to Parent Message