🚀 go-pugleaf

In <637nse$qb0@tandem.CAM.ORG>, zeus@cam.org writes:
>In <DtMT0UjRQE7f092yn@netcom.com>, skoper@netcom.com (Stan Koper) writes:
>>I just picked up an internal Philips k56flex modem.  I have a
>>dual boot system, Win95 and OS/2 4.0.  The modem set up under
>>Win95 as Com3, Irq 10.  I have the SIO drivers under OS/2, and
>>they don't recognize the modem *unless* I stop the boot at the
>>white square and select full hardware detection.
>>
>>When it does work under OS/2 it's still com3 (since the
>>motherboard has two serial ports), but the Irq is 7.  I haven't
>>tried it under WinOS/2.
>>
>>What I'd like to know is, is it possible to establish full
>>hardware detection *without* interrupting boot up?  Is there
>>some line I can add to config.sys or is there some other process
>>(like selective install) that I can use to get the modem
>>recognized by OS/2?

If you go to the Properties setting of the Hardware Manager you can set for
full hardware detect.  (OS/2 System>System Setup>Hardware Manager and right click).

>>
>>
>>In article <342F3E86.4012@focus.winternet.com>,
>>Trev Peterson <tpeterso@focus.winternet.com> wrote:
>>>I am having problems with a Boca Office Communicator FDV34SVD PNP
>>>fax/modem.  When the modem is in the mouse locks up in OS/2 V4.00.  I
>>>checked this using Win95 to verify that it worked there and it did.
>>>
>>disable one of your comports if it is an internal modem
>
>



-------
Ed Wellner
Yes, these are my opinions, not those of the company I work for.