🚀 go-pugleaf

In <DtMT0UjRQE7f092yn@netcom.com>, skoper@netcom.com (Stan Koper) writes:
>I just picked up an internal Philips k56flex modem.  I have a
>dual boot system, Win95 and OS/2 4.0.  The modem set up under
>Win95 as Com3, Irq 10.  I have the SIO drivers under OS/2, and
>they don't recognize the modem *unless* I stop the boot at the
>white square and select full hardware detection.
>
>When it does work under OS/2 it's still com3 (since the
>motherboard has two serial ports), but the Irq is 7.  I haven't
>tried it under WinOS/2.
>
>What I'd like to know is, is it possible to establish full
>hardware detection *without* interrupting boot up?  Is there
>some line I can add to config.sys or is there some other process
>(like selective install) that I can use to get the modem
>recognized by OS/2?
>
>
>In article <342F3E86.4012@focus.winternet.com>,
>Trev Peterson <tpeterso@focus.winternet.com> wrote:
>>I am having problems with a Boca Office Communicator FDV34SVD PNP
>>fax/modem.  When the modem is in the mouse locks up in OS/2 V4.00.  I
>>checked this using Win95 to verify that it worked there and it did.
>>
>disable one of your comports if it is an internal modem