Re: FaxWorks VS. U.S.Robotics Sportster 28.8kb modem

Article View: comp.os.os2.setup.misc

Article #8

Back to comp.os.os2.setup.misc Previous Next

From: mork
Date: Wed, 20 Dec 1995 12:51

19 lines
1051 bytes

afelson@rainbow.rmii.com (Adam Felson) wrote:

>I'm unable to use my new U.S.Robotics Sportster 28.8 w/ FaxWorks.  Upon 
>examining the log, it seems that FaxWorks is issueing a "&D3" command (do 
>a soft reset upon DTR loss) which is causing the modem to respond with 
>"ERROR".

>Can the U.S.Robotics be setup to ignore commands it doesn't understand?
>Can FaxWorks be modified to not issue this command?

I use USR sporster 28.8.  I set the following:
Class 1
Receive EOP delay
Use HW FIFO
Special Commands &H2&I2

Didn't hack the binary and this works fine to receive. Haven't
tried to send anything.

Technical Details

Message-ID: <4b90n2$d9@dallas1.connect.net>

Path: arc1-ca.pugleaf.net!news.connect.net!usenet

References: <4apebd$iac@natasha.rmii.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!news.connect.net!usenet
From: mork@nanook
Newsgroups: comp.os.os2.setup.misc,comp.os.os2.apps,comp.dcom.modems
Subject: Re: FaxWorks VS. U.S.Robotics Sportster 28.8kb modem
Date: Wed, 20 Dec 1995 12:51:39 GMT
Organization: Connection Technologies
Message-ID: <4b90n2$d9@dallas1.connect.net>
References: <4apebd$iac@natasha.rmii.com>
NNTP-Posting-Host: a1p35.connect.net
X-Newsreader: Forte Free Agent 1.0.82

Reply to Parent Message