Sound and network problems on a laptop

Thread View: comp.os.os2.setup.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by pc00 Mon, 19 Aug 1996 00:00

#133

Author: pc00
Date: Mon, 19 Aug 1996 00:00

22 lines
1791 bytes

I have a Panasonic cf-41 laptop to which I recently installed a Xircom
CE3 network card. This created a problem which I cannot solve.
When I origanlly installed connect on the laptop the onboard sound 
card was originally configured to use DMA 1 and IRQ 10. Rebooting
after installation gave continuously looping sound effects. Changed 
the IRQ to 5, upon suggestion of someone from Usenet group, and
everything worked fine. Until I installed the network
card. By default it used IRQ 5 also. I installed TCP/IP and accepted 
the defaults for the network card (I took the simplest route), without
thinking about the sound card's IRQ. After TCP/IP installation I
changed the IRQ of the sound card, to 11 and then to 7 (I don't often
use a printer with laptop so it's still in polling modeso I can use 
7). When I changed the sound card's IRQ to something other than 5 I 
get continuously looping sound effects. I used RMVIEW to check the 
IRQ's in use and 7, 10 and 11 weren't in use, so I don't think it's a 
conflict problem. I'm using the drivers for the sound card that came 
with connect. I'm doing a demo in a few days and I need sound. Please 
help.

Michael Smar
pc00@sdsumus.sdstate.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads