Help with SCSI SyQuest drive under OS/2

Thread View: comp.os.os2.setup.storage

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Chris Barnabo Thu, 04 Apr 1996 05:34

#69

Author: Chris Barnabo
Date: Thu, 04 Apr 1996 05:34

18 lines
1319 bytes

I'm running OS/2 Warp Connect on an IBM ThinkPad.  My SCSI interface is an 
IBM PCMCIA SCSI adapter (I'm told it's the same as a Future Domain 16-700). 
As far as I can tell, the SCSI adapter itself is setup OK (at least,  
Plug 'n Play for PCMCIA is showing it as a SCSI card and it's active).  I 
have not been able to get my SyQuest EZ135 recognized by OS/2, though:   
it's as if it just isn't there.  Under DOS it works, and SyQuest's  
diagnostics (also DOS pgms) run OK, so it *must* be either a SyQuest  
setup/driver problem or a SCSI problem. 
 
There are no reported errors during the bootup of the system. 
 
Any ideas?  Help!  Thanks in advance!

-- Chris      ________*________ 
____________  \_______________/ Chris Barnabo, irish89@ibm.net 
\__________/      / / 
     __\ \_______/ /__         "The heck with the Prime Directive, 
     \_______________/(-        let's destroy something!"

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads