🚀 go-pugleaf

On 31 May 1998 04:41:10 GMT, ih8.spam@dont.try.it (Michael Block) wrote:

> has anyone managed to successfully run the Escape 2.1 screensaver with
> a Matrox card? I'm trying to run it with driver 2.13.053 on a 4MB 
> Matrox Mill at 1024x768 and 16M colours on a K6 233
> t won't run with dive enabled ( it gives displaced multiple images and
> strippy images), and VERY slowly with it disabled. I've tried the 
> config.sys line suggested in the documentation with no effect.
> 
> Any ideas? Any luck?

I'm running at 1024x768, 16m colors, 4mb Matrox Mill (and also 8mb on another
machine).  I had to add the following lines to my config.sys

REM *** OpenGL correction for Matrox video driver problem
SET OGL_BIT_COUNT=32
SET OGL_SCANLINE_SIZE=4096


Works fine now.  DIVE and ENDIVE enabled.  Warp Connect, FP35, 2.20.055
drivers.

Needless to say, it runs MUCH faster on my new P-II 400mhz 128meg machine than
on my P133mhz 96meg machine.  But the OGL fixes to config.sys did the trick.


--
//
//   Darryl Sperber  (sperber@airmail.net)
//