🚀 go-pugleaf

On Fri, 19 May 1995, Kevin Lincoln wrote:

> I've managed to install warp but when it startsup I get 2 horizontal spilt screens.
> The top part of one and the bottom part of the other.		

Classic symptom of driver not matching the video hardware.

> I have a trident vga screen with 1mb.
> When I did the install it thought I had a EGA but I don't.
> IF I choose another from the dialog box I still get a spilt screen.

Defaults to EGA? How interesting.

> How do I install the right driver for my card.?

I don't know much about trident cards. But there are a lot of drivers in 
the IBM OS/2 depository. You might want to try there to see if there's 
appropriate drivers for your card.

*******************************************************************
 _________________________________________________________________
/                                  |                              \
|             H. Young             | "If it's not a Sony, it's a  |
|          Biology BS '95          |  darn good trick."           |
|       Creighton University       |                              |
|       honge@creighton.edu        | Darwin of Borg:              |
|          zenon@ibm.net           | "Creationism is irrelevant.  |
|          (ABC) 592-5944          |  Evolution is inevitable.    |
|       No postage required        |  Resistance is futile. You   |
| Save the trees--Eat the beavers! |  will be assimilated."       |
\_________________________________________________________________/

*******************************************************************

In <Pine.HPP.3.91.950518123337.28837A-100000@bluejay.creighton.edu>, Lisa's pet <honge@creighton.edu> writes:
>On Fri, 19 May 1995, Kevin Lincoln wrote:
>
>> I've managed to install warp but when it startsup I get 2 horizontal spilt screens.
>> The top part of one and the bottom part of the other.		
>
>Classic symptom of driver not matching the video hardware.
>
>> I have a trident vga screen with 1mb.
>> When I did the install it thought I had a EGA but I don't.
>> IF I choose another from the dialog box I still get a spilt screen.

I missed the original post, but as someone who installed Warp on a
Trident 8900D yesterday, I can perhaps add some helpful comments. One 
problem that sometimes arises is that the SVGA ON command, issued when
you try to install using defaults for the adapter, hangs the system 
with either a blank or rolling screen. If that is the case, you can 
either:

1. Run SVGA ON under DOS (SVGA ON DOS) to create a SVGADATA.DOS file, 
then copy it to the \OS2 directory as SVGADATA.PMI. Then, to avoid 
SVGA.EXE running, overwrite it with some other harmless program (I 
simply copied LS.EXE, a directory utility, to \OS2\SVGA.EXE). Then run
DSPINSTL or the Selective Install utility. Or:

2. Create a SVGADATA.PMI as above, but then give the command

    RSPDSPI /PK:SVGA /SK:NONE /S:A: /T:C:\ /MC:2

where the /T: above should reference the target system boot drive.

Be advised that the IBM-supplied PSTRID.DSC and TR768BC.DSP files 
contain some syntax errors and need a little fiddling, as well, and 
that the 8900D is not supported officially.

--- Les

+--------------------------------------------------------+
| Les Bell                          Tel: +61 2 953 7619  |
| lesbell@ibm.net                   Fax: +61 2 953 0602  |
| lesbell@syd.interconnect.com.au   PO Box 297           |
| lesbell@acslink.net.au            Neutral Bay NSW 2089 |
| CIS: 71210,104                    Australia            |
+--------------------------------------------------------+

In article <3peq8e$b61@mariner.amc.edu.au>, K.Lincoln@its.amc.edu.au (Kevin Lincoln) says:
>
>I've managed to install warp but when it startsup I get 2 horizontal spilt screens.
>The top part of one and the bottom part of the other.           
>
>I have a trident vga screen with 1mb.
>When I did the install it thought I had a EGA but I don't.
>IF I choose another from the dialog box I still get a spilt screen.
>
>How do I install the right driver for my card.?
>
>You help well and truly appreciated     
>
>Regards: Kevin Lincoln.                 

Possibly you have an Interlaced display.... On the Trident Card, see if
it has a jumper to sellect Interlaced or Noninterlaced display.....
Set it for interlaced if possible.... If that works, then good!