Re: HELP HELP HELP OS/2 and Tseng Board HELP!

Article View: comp.os.os2

Article #800

#800

From: Louis Goldstein
Date: Mon, 09 Nov 1992 22:07

9 lines
1103 bytes

OS/2 has it's own setup to control how it talks to video adapters, and once you have
that set up, you will not need the VMODE command.  I don't know if you can do this
from real DOS, as it's normally done from a VDM, but worth a shot.  Use vmode to set
your video cards refresh rate ... for all your video modes.  Then go into \OS2 and
type SVGA ON.  This will create a configuration file (forget what it's called) with
all your video information.  After that, you shouldn't have any trouble.  

Hope this helps,
Louis

Technical Details

Message-ID: <1dmnfmINNslc@darkstar.UCSC.EDU>

Path: arc1-ca.pugleaf.net!sparky!uunet!ukma!darwin.sura.net!spool.mu.edu!agate!darkstar.UCSC.EDU!oak!louis

References: <1992Nov7.231239.27501@u.washington.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!ukma!darwin.sura.net!spool.mu.edu!agate!darkstar.UCSC.EDU!oak!louis
From: louis@oak.ucsc.edu (Louis Goldstein)
Newsgroups: comp.os.os2,comp.os.os2.misc,comp.sys.ibm.pc.hardware
Subject: Re: HELP HELP HELP OS/2 and Tseng Board HELP!
Date: 9 Nov 1992 22:07:50 GMT
Organization: University of California, Santa Cruz
Lines: 9
Sender: louis@oak (Louis Goldstein)
Distribution: world
Message-ID: <1dmnfmINNslc@darkstar.UCSC.EDU>
References: <1992Nov7.231239.27501@u.washington.edu>
Reply-To: louis@arapaho.ucsc.edu
NNTP-Posting-Host: oak.ucsc.edu

Reply to Parent Message