PAGEMATE-I ON PRIMAGE 90 PROBLEM

Article View: comp.periphs.printers

Article #2350

Back to comp.periphs.printers Previous Next

#2350

From: David Cissell
Date: Tue, 13 Feb 1990 15:50

19 lines
1159 bytes

I have installed a new Pagemate-I sheet feeder on a
Primage 90 printer.  I made the suggested changes to
the printer's dip switches.  

The sheet feeder rollers seem to rotate in the wrong
direction and tend to try to pull the paper away from
the printer rather than feeding it into the printer.

Does any one know what the problem cause might be?

Thanks for your help.

Dave Cissell

____________________________________________________________________
     Dave Cissell                |   Office of Naval Research
     CISSELL@VAXB.ISI.EDU        |   Engineering Support Office
     (818) 405-0876              |   Pasadena
____________________________________________________________________

Technical Details

Message-ID: <11858@venera.isi.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!venera.isi.edu!cissell

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!venera.isi.edu!cissell
From: cissell@vaxb.isi.edu (David Cissell)
Newsgroups: comp.periphs.printers
Subject: PAGEMATE-I ON PRIMAGE 90 PROBLEM
Message-ID: <11858@venera.isi.edu>
Date: 13 Feb 90 15:50:50 GMT
Sender: news@venera.isi.edu
Reply-To: cissell@vaxb.isi.edu.UUCP (David Cissell)
Distribution: usa
Organization: USC-Information Sciences Institute
Lines: 19