🚀 go-pugleaf

Don't forget that the printer goes through a headclean cycle at start up, 
sometimes when powering off the printer and at set times during printing. 
You cannot alter that procedure. This will cause your ink cartridge to empty 
even with no colour printing. However, as each cartridge has the printhead 
on it, you can leave an empty one in the machine. The printer should 
continue to work normally, setting it to grey scale is a useful suggestion 
many printers use blue ink with the black to produce a true deep black.

-- 
Regards
Stick, Oxford, UK
#Remove the 'at' and the'dots' to reply
"A. Jacobs" <2001jgy.no@spam.yahoo.com> wrote in message 
news:tdpPe.4141$Z87.1539@newssvr14.news.prodigy.com...
> We are using Hewlett Packard Deskjet 970cxi printers in our office.
> This deskjet requires both color and black ink cartridges with ink in the
> printers for it to work.
> However, we ONLY use the black ink to print office documents.
> We are using the Windows XP and have set the printer property preference 
> to
> print in Black only (Advance - Color).
> We found the color cartridges still being used and in time its empty and
> requires to replace with new ones.
>
> Can you tell me how to either disable the color ink cartridge ink level
> sensors or disable to software to use any color ink at all?
>
> We do know HP is getting rich selling us those expensive color ink
> cartridges.
> Your advise is much appreciated.
>
>
>