🚀 go-pugleaf

In article <6lms0l$pgs$1@gte1.gte.net>,
  "Jon C. Domke" <jdomke1@total-photo.com> wrote:
>
> Here's the way to get the HP PhotoSmart Scanner to work in NT 4.0
>
> 1. Power down and install the supplied SCSI card and attach the scanner.
>
> 2. Create a directory off your C: drive called "6100c", then download
> DeskScan-II from HP's website to that directory.
>

OK, where do you find this sj180en.exe file on HP's site. I have searched til
I am blue! All I have been able to come up with is a sj179en.exe file, but
that is not it. Please help!


> 3. Then unpack the DeskScan software by typing the following at a Dos
> Prompt:
>     C:> CD C:\6100c
>     C:> SJ180EN.EXE /d
>
> 4. Return to Windows and run the Setup in C:\6100c\disk1. Specify that you
> have a Symbios 53C416 SCSI Card. This installs DeskScan-II.
>
> 5. Create an empty file called "hpi_dev.ini" using your notepad. Place this
> file in the C:\WINNT directory.
>
> 6. Run the normal Windows95 setup.exe on the provided PhotoScanner CD-Rom.
>
> That should do it. Of course, re-boot when your done.
>
> This worked fine for me. Please let me know of your sucess.
>
>


-----== Posted via Deja News, The Leader in Internet Discussion ==-----
http://www.dejanews.com/rg_mkgrp.xp   Create Your Own Free Member Forum