Adaptec 2370 RLL Controller

Article View: comp.periphs

Article #1243

#1243

From: Neal Ostrem
Date: Mon, 14 Dec 1992 06:32

30 lines
1185 bytes

I just purchased a used Adaptec ACB-2370 RLL Disk controller (Rev B?).
Unfortunately, no docs were available for it.  I looked at the ASCII
files on Adaptec's BBS on this line of controllers but none of the 
jumper definitions seem to correspond to the labels on the jumper of
my card.  Does anyone out there have the definitions for the following
jumpers?  The card is a Rev. B (I think!).


J5:   5 pairs of pins

J6:   8 pairs of pins

J7:   4 pairs of pins

J8:   3 single pins

J9:   4 pairs of pins

J10:  4 single pins (Interrupt level?)

J11:  4 single pins (Drive Activity LED connector?)

Thanks in advance.

-------------
Neal Ostrem       email:  nealo@netcom.com
-- 
Neal Ostrem          e-mail:  nealo@netcom.com

#include <disclaimer.std>

Technical Details

Message-ID: <1992Dec14.063257.19148@netcom.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!spool.mu.edu!umn.edu!csus.edu!netcom.com!nealo

Show Full Headers

Complete Article Headers

Newsgroups: comp.periphs
Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!spool.mu.edu!umn.edu!csus.edu!netcom.com!nealo
From: nealo@netcom.com (Neal Ostrem)
Subject: Adaptec 2370 RLL Controller
Message-ID: <1992Dec14.063257.19148@netcom.com>
Organization: Netcom - Online Communication Services  (408 241-9760 guest) 
X-Newsreader: Tin 1.1 PL5
Distribution: usa
Date: Mon, 14 Dec 1992 06:32:57 GMT
Lines: 31